- 637
- 970
- 93
- Location
- La Crosse, WI
Best price I've heard of for new, where did you source them?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your FMTV or LMTV today
- Thread starter Coffey1
- Start date
- 74
- 107
- 33
- Location
- San Angelo, TX
I'm the Medical Director for the Goodyear Proving Grounds here. They worked a sweetheart deal for me. I've overseen their first responders and taught Stop the Bleed courses for them for five years without reimbursement.
Ryan31783
Member
- 33
- 36
- 18
- Location
- Southwestern Utah
Have been working on upfitting my wildland rig for comfort and convenience. Working on a center console, built an interior and overhead console, carpeted it, and fabbed up a cab air ride system with more travel and some adjustability.
Attachments
- 841
- 1,532
- 93
- Location
- Mesa Colorado
That's looking pretty sweet. Is that stainless or Al.?
Ryan31783
Member
- 33
- 36
- 18
- Location
- Southwestern Utah
Thank you, It’s all aluminum, .063 5052. The top of the center console will be .120” 5052
Last edited:
- 841
- 1,532
- 93
- Location
- Mesa Colorado
I wanted to the same thing but love welding stainless. I'd have to go thin of course.
- 841
- 1,532
- 93
- Location
- Mesa Colorado
Meritor locker acquired. 
Attachments
- 637
- 970
- 93
- Location
- La Crosse, WI
Wonder the drivability with a 6x6 , having lockers in both rears. I have tight corners around here.Meritor locker acquired.
- 2,051
- 5,257
- 113
- Location
- Portland, OR
@ckouba has them in both of the rears of his M1088 chassis and has nothing but positive things to say. I've driven his truck and I don't notice any behavior of any kind from the lockers on pavement or in tight corners. They may as well not be there from that perspective.
- 688
- 1,760
- 93
- Location
- San Diego, CA
How much did you score those little bad boys for?Meritor locker acquired.
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
you can get that type Locker for around same or less from Bryce Wasielak. He has sold hundreds of them with out anyone having issues.
You wont need one in both rear axles. one of them is fine. IMHO do the middle axle so you scrub tires less with it in the rear axle. Granted install in middle axle is more difficult. Bryce can give you ton of info on that. He drove all over the country for a while installing them for people.
Bryce Wasielak
Bryce Wasielak is on Facebook. Join Facebook to connect with Bryce Wasielak and others you may know. Facebook gives people the power to share and makes the world more open and connected.
www.facebook.com
- 841
- 1,532
- 93
- Location
- Mesa Colorado
These guys have it. A few More $ than the other place that shall not be named. I also bought the hub socket too.
https://westerncanadianrockwell.ca/products/meritor-differential-locker?_pos=2&_sid=69dddd17f&_ss=r
Can confirm... Didn't do too much driving prior to the install but don't notice anything with them in. Except that I had one small, local, slippery pile of dirt that I struggled to get over prior to the install. Once they were in, I went back and just drove over it. No monkey business.
I also just logged my first real mileage on sand and the truck was fantastic. Not sure if that was because of lockers, airing down, etc... but I was still glad to have them.
As an aside, Bruce told me he has a customer with a front locker too. No issues. He said he'd do it too.
- 841
- 1,532
- 93
- Location
- Mesa Colorado
Front huh? That's intriguing. My previous truck with a front locker acted weird with hubs engaged but those were much smaller tires and shorter wheelbase.
- 283
- 639
- 93
- Location
- North Carolina
can confirm function with lockers on intermediary.
But guess which axle eats off tires faster than the others?
yep, the middle one. I try to take Wiiiiiiiiiiiide turns on pavement.
FYI I have the LWB
Last edited:
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
makes logical sense..... and IMHO if locker was in rear axle; that set of tires would end up wearing the most, but having worn even more than what you have experienced. thus far. but that is only speculation and a debate for other threads on something like: "Which axle in a 6x6 for locker placement?". (which actually already exist in here)
- 841
- 1,532
- 93
- Location
- Mesa Colorado
I've been studying this thing a little. I'm familiar with the EZ locker or lunch-box locker in a pickup but never used a DL before. Now that I took it apart, operation seems obvious and BP. Shocked that the all-knowing DoD opted to install LBCDs in these trucks but not a DL in the rear at least. I'm might get another one for the frontyou can get that type Locker for around same or less from Bryce Wasielak. He has sold hundreds of them with out anyone having issues.
You wont need one in both rear axles. one of them is fine. IMHO do the middle axle so you scrub tires less with it in the rear axle. Granted install in middle axle is more difficult. Bryce can give you ton of info on that. He drove all over the country for a while installing them for people.
Bryce Wasielak
Bryce Wasielak is on Facebook. Join Facebook to connect with Bryce Wasielak and others you may know. Facebook gives people the power to share and makes the world more open and connected.
. I FM'd Bryce. I wasn't previously aware of his efforts.Attachments
- 2,051
- 5,257
- 113
- Location
- Portland, OR
Any idea what factory in china is making them? Most of this type of stuff comes out of smaller production in China or Taiwan. If we could find the manufacturer we might be able to do a group buy here on the forum.
- 637
- 970
- 93
- Location
- La Crosse, WI
Too me, that pretty much proves it's locking on pavement around turns. I have lwb too. I have to 3 point to get out of my driveway.
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
Brcyce has I believe a non Asian country making them for him.. you honestly cant do better last time I got one from him.