shawnshumvee
Member
- 336
- 6
- 18
- Location
- Janesville WI
If any one needs cv boots for the humvee (like who doesn’t) they are Available at Napa
Under this part number...
Under this part number...
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your HMMWV today/lately
- Thread starter Warthog
- Start date
- 1,332
- 585
- 113
- Location
- Quantico VA
That's a pretty nifty idea to add storage and other capabilities on what otherwise is a real nose-wart of a cover. I'm going to steal that idea.
BDGR
NormB
Well-known member
- 1,220
- 72
- 48
- Location
- Cloverly,MD
Looks promising... inboard or outboard boots?
Tried finding those on their website - no joy.
Only real plus side to using the website is NOT hearing "year, make and model sir?"
NB
Last edited:
Action
Well-known member
- 3,576
- 1,557
- 113
- Location
- East Tennessee
looks nifty, but are those the power wires running under the seal near the passenger seat? How does he fasten the top left dzus fastener?
MIDDLEMAN
Member
- 52
- 8
- 8
- Location
- Arlington/Washington
Yes...very nice use of space, maybe a drop in cup holder on top of the lower surface. I also have a question if anybody might have a answer? Replaced the seals on the front differential. found the torque specs for eveything except the pinion shaft yoke lock nut. Torque or procedure???
Action
Well-known member
- 3,576
- 1,557
- 113
- Location
- East Tennessee
The pinion nut is a bit more complicated than just torque it down. There is a crush sleeve inside and there are close tolerances. The torque resistance (or something like that) needs to be measured before the nut is removed. The specifics are in the books. Look for diff input yoke replacement section.
kzeyus
Active member
- 141
- 30
- 28
- Location
- Rogers, AR
In process of doing this. A diagram of plumbing and any other info you can provide would be most helpful. Thx
dhaumann69166
Active member
- 234
- 78
- 28
- Location
- Hyannis, Nebraska
Put a new input seal on the front right geared hub. First time I have ever messed with the geared hubs but it’s simple. Took just over an hour including tool clean up and filling it with oil. I made sure to spin the hub a few times while filling it with oil to get all the air bubbles out of the gears. Previous owner drove it a lot in deep water ford and I think that had a lot to do with the seal failing.
Also put a new 3 lever light switch in and now all my lights work. The switch before this one was also brand new but the brake lights and dash lights wouldn’t work.
Finished my interior insulation and just waiting for the Durabak 18 to arrive so I can do the inside and out. Staying white outside and white and gray inside. Trying to decide if I want black or lime green accents on the outside (hood grill, lift hooks, light housings, gas cap and stuff like that). What do you guys think? White and black or white and lime green? I did my 72 Scout II white and green and loved it but the wife keeps saying not everyone likes that color as much as me lol. Here is the Scout that is the inspiration for green and the humvee that’s getting painted
Also put a new 3 lever light switch in and now all my lights work. The switch before this one was also brand new but the brake lights and dash lights wouldn’t work.
Finished my interior insulation and just waiting for the Durabak 18 to arrive so I can do the inside and out. Staying white outside and white and gray inside. Trying to decide if I want black or lime green accents on the outside (hood grill, lift hooks, light housings, gas cap and stuff like that). What do you guys think? White and black or white and lime green? I did my 72 Scout II white and green and loved it but the wife keeps saying not everyone likes that color as much as me lol. Here is the Scout that is the inspiration for green and the humvee that’s getting painted
Last edited:
- 1,332
- 585
- 113
- Location
- Quantico VA
Saw this 2 man at a winery in the mountains of Santa Cruz today. Closest I can get to doing anything w a HMMWV since I’m across the country from mine.
Bulldogger
Bulldogger
Attachments
2wheels70
Member
- 46
- 0
- 6
- Location
- Nashville TN
Installed some new treadwright guard dogs and PVC inserts on 24 bolts today
Tell you what I think of them soon
Tell you what I think of them soon
Sisu
New member
- 10
- 0
- 1
- Location
- Eau Claire, MI
I finished up painting my rig last fall and didn't get around to posting any pictures. It looks great at 10', and that's what I was going for.
Attachments
- 18,540
- 5,843
- 113
I LOVE that BIG WHITE STAR on your hood!
Obviously, it's not "period correct", but it DOES provoke a bit of a nostalgic love for MV's.
Also, upholstered the inside...I cleaned mine up and fabricated an aluminum roof.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Mario
Active member
- 315
- 87
- 28
- Location
- Rio Rancho, NM
I like it. I like it a lot.Also, upholstered the inside...
Sent from my iPhone using Tapatalk
Is this a kit or did you literally fab it yourself?
Sent from my SM-G930P using Tapatalk
Fabricated myself, got a shop in Staten Island New York. Started working on a friends, now I’ve got a few of my own. Thank you!
Here’s another hard top I’ve done recently
I hope to fabricate these things all day long!
.
Sent from my iPhone using Tapatalk
Mario
Active member
- 315
- 87
- 28
- Location
- Rio Rancho, NM
I wish I still lived in SI, I would so ask you to fab me a set.Fabricated myself, got a shop in Staten Island New York. Started working on a friends, now I’ve got a few of my own. Thank you!
Here’s another hard top I’ve done recently
I hope to fabricate these things all day long!
.
Sent from my iPhone using Tapatalk
Sent from my SM-G930P using Tapatalk
Also, upholstered the inside...
Sent from my iPhone using Tapatalk
I'm really liking the headliner! It makes it look finished off, and neat.
twisted60
Well-known member
- 617
- 250
- 63
- Location
- Jupiter, Florida
if you can fab doors and tops you'll have people buying you out of stock... I'd be in that line.