• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What have you done to your HMMWV today/lately

Godspeed131

Godspeed131

Well-known member
Steel Soldiers Supporter
280
933
93
Location
Knoxville, TN
Lawdog734 said:
@frauhansen and @Godspeed131 - what are you guys using for a digital rear view "mirror"/monitor?

I'm looking for one for mine but haven't found one I quite like yet - I want a rear-view mirror proxy and don't want a split-screen/parking lines to be constantly on.
Click to expand...
I just went with one off of amazon, https://a.co/d/d85Cn3m. I wanted a unit that had the rearview camera and CarPlay so I can use the phones navigation if need be. The CarPlay linked to the phone works flawlessly so far but I haven’t yet had time to install the rearview camera yet. Spring time farm chores are priority right now.
 
Gcelevator

Gcelevator

Well-known member
Steel Soldiers Supporter
497
711
93
Location
Fort Lauderdale, Florida USA
Installed a new soft top with now quarters given flag from William Welsh (blue ox) his work, as usual is outstanding. He will be re-stitching my previous top and does not want to charge me, even though i explain to him i beat the hell of my truck and use it everyday.
 

Attachments

Bulldogger

Bulldogger

Well-known member
Steel Soldiers Supporter
1,330
586
113
Location
Quantico VA
Gcelevator said:
Installed a new soft top with now quarters given flag from William Welsh (blue ox) his work, as usual is outstanding. He will be re-stitching my previous top and does not want to charge me, even though i explain to him i beat the hell of my truck and use it everyday.
Click to expand...
Bill does great work. If you ever want a soft slant back to match I use the same material from the same vendor.
BDGR
 
kurtvk

kurtvk

Member
Steel Soldiers Supporter
34
63
18
Location
NW Indiana (USA)
Gcelevator said:
Installed a new soft top with now quarters given flag from William Welsh (blue ox) his work, as usual is outstanding. He will be re-stitching my previous top and does not want to charge me, even though i explain to him i beat the hell of my truck and use it everyday.
Click to expand...
VERY Nice !! what brand/model are those seats, and rim-tires?
 
Gcelevator

Gcelevator

Well-known member
Steel Soldiers Supporter
497
711
93
Location
Fort Lauderdale, Florida USA
kurtvk said:
VERY Nice !! what brand/model are those seats, and rim-tires?
Click to expand...
Seats are regular from ebay or amazon. I will try to get a link and post. Rims are black rhino abrams 17" and tires are Toyo's 40's M/T. Not noisy at all for the kind of tire.

Edit: seats are from ebay, picture attached.
 

Attachments

C

cahilj

Active member
29
132
28
Location
KS
Popped the little hole plugs into underside of the hood, finishing up that project.

Installed what I consider the absolute coolest strap on the entire truck. When you're on a multi hour convoy, you can kill time by counting the number of times it sways back and forth-
20240424_192826.jpg

Rebuilt the pintle, which didn't swivel and was missing the lock pin and chain. Yes, I know the chain and pin I used isn't AMG, but I had them kicking around and they worked. BTW- there's a grease zerk on this thing. Mine hadn't been used since the truck was built-
20240424_192844.jpg

Swapped the front shackles to the rear in order to clean up the front mounts, then reinstall the NOS shackles I got from Austin-
20240424_192915.jpg

My boy keeps having issues with the VIC headsets (both Bose and Racal) staying on his head (he's 9), so I picked up some cheap headset pads to see if it works. Anyone ever seen a smaller size headset adapted to the VIC?
20240424_192946.jpg

He's also been begging for a cupholder. These were the most heavy duty I could find in the style I wanted. 3/16 powdercoated steel. Not sure on mounting yet-
20240424_193021.jpg

This truck came with the driver seat out of a ECV for whatever reason. It's a bit too tall for me. Will someone with an A0,A1,A2 measure their seat mount to see how it differs from the energy absorbing one?
20240424_193158.jpg
 
Mogman

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,947
9,606
113
Location
Papalote, TX
cahilj said:
Popped the little hole plugs into underside of the hood, finishing up that project.

Installed what I consider the absolute coolest strap on the entire truck. When you're on a multi hour convoy, you can kill time by counting the number of times it sways back and forth-
View attachment 921835

Rebuilt the pintle, which didn't swivel and was missing the lock pin and chain. Yes, I know the chain and pin I used isn't AMG, but I had them kicking around and they worked. BTW- there's a grease zerk on this thing. Mine hadn't been used since the truck was built-
View attachment 921836

Swapped the front shackles to the rear in order to clean up the front mounts, then reinstall the NOS shackles I got from Austin-
View attachment 921837

My boy keeps having issues with the VIC headsets (both Bose and Racal) staying on his head (he's 9), so I picked up some cheap headset pads to see if it works. Anyone ever seen a smaller size headset adapted to the VIC?
View attachment 921838

He's also been begging for a cupholder. These were the most heavy duty I could find in the style I wanted. 3/16 powdercoated steel. Not sure on mounting yet-
View attachment 921839

This truck came with the driver seat out of a ECV for whatever reason. It's a bit too tall for me. Will someone with an A0,A1,A2 measure their seat mount to see how it differs from the energy absorbing one?
View attachment 921840
Click to expand...
Where did you get the cup holders?
Also I wonder if you can't just remove the energy absorbing mount??
 
C

cahilj

Active member
29
132
28
Location
KS
Mogman said:
Where did you get the cup holders?
Also I wonder if you can't just remove the energy absorbing mount??
Click to expand...
https://asktractormike.com/product/tractor-or-zero-turn-heavy-duty-cup-holder/

Stumbled on it just searching around.

I don't think I can just take the mount out. The bolt pattern is different from the sliders to the seat. There might be another set of holes though. I have considered bending a mount similar to the A0 one, but I haven't gotten that far yet. I'm too busy driving it to want the seat out for a while :D
 
You must log in or register to reply here.
110,926members
165,351threads
2,326,667posts
1,614online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks