• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Mep-002a fuel pump question

Guyfang

Guyfang

Moderator
Staff member
Moderator
16,766
24,074
113
Location
Burgkunstadt, Germany
The little box is to prevent radio interference. I can happen, that you get some sort strange sounds on your radio or TV. Your set should run perfectly without it. I hope you got the right pump. If its not a flow through type, then later on in life, it could cause a problem,

RFI rarely happens today, but can. Whats wrong with the old pump?
 
D

DOGWOODRIDGE

Member
30
3
8
Location
jackson, la
DOGWOODRIDGE said:




Sent from my iPhone using Tapatalk
Click to expand...
Just quit working. Took cover off. Filter was clean. Put power to it and nothing happens. No clicking. Thank you for your help. Sorry, I’ll be 80 next year and have a little trying to post and send pictures and just about everything in my life. I appreciate your patience with me.


Sent from my iPhone using Tapatalk
 
D

DOGWOODRIDGE

Member
30
3
8
Location
jackson, la
DOGWOODRIDGE said:
Just quit working. Took cover off. Filter was clean. Put power to it and nothing happens. No clicking. Thank you for your help. Sorry, I’ll be 80 next year and have a little trying to post and send pictures and just about everything in my life. I appreciate your patience with me.


Sent from my iPhone using Tapatalk
Click to expand...
New one is 24V with 8PSI


Sent from my iPhone using Tapatalk
 
C

Chainbreaker

Well-known member
1,796
1,992
113
Location
Oregon
Something to try on your old pump... cut out the old RFI suppressor module and butt splice the wires together and see if it works. If it does, you now have a spare. In civilian life you really don't need RFI suppression unless perhaps your a Ham Radio operator or have other sensitive equipment susceptible to RF interference.

The RFI module is notorious for failing at some point and you get the symptoms you experienced, dead pump. Otherwise, you can disassemble the pump internals and clean them up and that might fix it as well. If you do a search in this forum on either MEP-002 or MEP-003 fuel pump you will get lots of information and pictures.
 
Last edited:
D

DOGWOODRIDGE

Member
30
3
8
Location
jackson, la
Chainbreaker said:
Something to try on your old pump... cut out the old RFI suppressor module and butt splice the wires together and see if it works. If it does, you now have a spare. In civilian life you really don't need RFI suppression unless perhaps your a Ham Radio operator or have other sensitive equipment susceptible to RF interference.

The RFI module is notorious for failing at some point and you get the symptoms you experienced, dead pump. Otherwise, you can disassemble the pump internals and clean them up and that might fix it as well. If you do a search in this forum on either MEP-002 or MEP-003 fuel pump you will get lots of information and pictures.
Click to expand...
Thank you. I will try that. I do also have an MEP-003 generator. It would be nice to have a spare.


Sent from my iPhone using Tapatalk
 
R

Ray70

Well-known member
2,592
5,907
113
Location
West greenwich/RI
FYI, if you ever need another pump there are several others available in the $30 range that will work perfectly in your machine in a single pump setup. ( not sure if they are flow through or not )
Another tip is that if you are running the original 2 pump redundant system, unplug one pump. Why run both at the same time for no reason. Run one and if it someday quits, you have a spare already plumbed in, just plug her back in!
 
Guyfang

Guyfang

Moderator
Staff member
Moderator
16,766
24,074
113
Location
Burgkunstadt, Germany
You need to stop saying sorry. Nothing wrong with not knowing something, and we are all still learning, up till the dude with the scythe knocks on the door. You got 12 years on me. We may be old, but we ain't dead.

A TM is a Technical Manual. The TM's are the what everyone needs to get smart about equipment. There is more then one TM for this gen set. G.M. tends to not have the latest changed TM's. The TM forum here in SS, Steel Soldiers is, on the whole a bit better.

When you need help, say something. That's what this forum is all about. The first two TM's are the engine TM's. The -24 TM is engine info, and maintenance info. The -24P is the parts info for the engine. The third TM is for the control box and main generator parts. The forth TM is for the conversion from gas engine to Diesel engine. Sometimes its mighty handy. The fifth TM is for the control panel and main generator, operator and maintenance info.
 

Attachments

D

DOGWOODRIDGE

Member
30
3
8
Location
jackson, la
Guyfang said:
You need to stop saying sorry. Nothing wrong with not knowing something, and we are all still learning, up till the dude with the scythe knocks on the door. You got 12 years on me. We may be old, but we ain't dead.

A TM is a Technical Manual. The TM's are the what everyone needs to get smart about equipment. There is more then one TM for this gen set. G.M. tends to not have the latest changed TM's. The TM forum here in SS, Steel Soldiers is, on the whole a bit better.

When you need help, say something. That's what this forum is all about. The first two TM's are the engine TM's. The -24 TM is engine info, and maintenance info. The -24P is the parts info for the engine. The third TM is for the control box and main generator parts. The forth TM is for the conversion from gas engine to Diesel engine. Sometimes its mighty handy. The fifth TM is for the control panel and main generator, operator and maintenance info.
Click to expand...
You are very kind. Thank you.


Sent from my iPhone using Tapatalk
 
D

DOGWOODRIDGE

Member
30
3
8
Location
jackson, la
Guyfang said:
You need to stop saying sorry. Nothing wrong with not knowing something, and we are all still learning, up till the dude with the scythe knocks on the door. You got 12 years on me. We may be old, but we ain't dead.

A TM is a Technical Manual. The TM's are the what everyone needs to get smart about equipment. There is more then one TM for this gen set. G.M. tends to not have the latest changed TM's. The TM forum here in SS, Steel Soldiers is, on the whole a bit better.

When you need help, say something. That's what this forum is all about. The first two TM's are the engine TM's. The -24 TM is engine info, and maintenance info. The -24P is the parts info for the engine. The third TM is for the control box and main generator parts. The forth TM is for the conversion from gas engine to Diesel engine. Sometimes its mighty handy. The fifth TM is for the control panel and main generator, operator and maintenance info.
Click to expand...
Can you give me the pdf lists like this for my MEP-002 and MEP-003 please.


Sent from my iPhone using Tapatalk
 
Guyfang

Guyfang

Moderator
Staff member
Moderator
16,766
24,074
113
Location
Burgkunstadt, Germany
Here are the TM's for the MEP-002A. Keep in mind, the 002A and 003A are almost the same. So you can use the 002A books for the 003A . Yes, there are a few differences, when ordering a VERY few parts. But by and large, the TM's are 99.99% interchangeable.
 

Attachments

You must log in or register to reply here.
110,879members
165,314threads
2,326,214posts
2,060online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks