DOGWOODRIDGE
Member
- 30
- 3
- 8
- Location
- jackson, la
Generator fuel pump question
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Mep-002a fuel pump question
- Thread starter Tpoole
- Start date
- 16,662
- 23,800
- 113
- Location
- Burgkunstadt, Germany
Darn! My Crystal ball is missing. Since it is, why don't you give us a hint?? What do you need to know?
DOGWOODRIDGE
Member
- 30
- 3
- 8
- Location
- jackson, la
What is little square box that runs in line with my fuel pump for? Will my new one without that perform properly?
Sent from my iPhone using Tapatalk
- 16,662
- 23,800
- 113
- Location
- Burgkunstadt, Germany
The little box is to prevent radio interference. I can happen, that you get some sort strange sounds on your radio or TV. Your set should run perfectly without it. I hope you got the right pump. If its not a flow through type, then later on in life, it could cause a problem,
RFI rarely happens today, but can. Whats wrong with the old pump?
RFI rarely happens today, but can. Whats wrong with the old pump?
DOGWOODRIDGE
Member
- 30
- 3
- 8
- Location
- jackson, la
Sent from my iPhone using Tapatalk
DOGWOODRIDGE
Member
- 30
- 3
- 8
- Location
- jackson, la
Just quit working. Took cover off. Filter was clean. Put power to it and nothing happens. No clicking. Thank you for your help. Sorry, I’ll be 80 next year and have a little trying to post and send pictures and just about everything in my life. I appreciate your patience with me.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
DOGWOODRIDGE
Member
- 30
- 3
- 8
- Location
- jackson, la
Chainbreaker
Well-known member
- 1,782
- 1,936
- 113
- Location
- Oregon
Something to try on your old pump... cut out the old RFI suppressor module and butt splice the wires together and see if it works. If it does, you now have a spare. In civilian life you really don't need RFI suppression unless perhaps your a Ham Radio operator or have other sensitive equipment susceptible to RF interference.
The RFI module is notorious for failing at some point and you get the symptoms you experienced, dead pump. Otherwise, you can disassemble the pump internals and clean them up and that might fix it as well. If you do a search in this forum on either MEP-002 or MEP-003 fuel pump you will get lots of information and pictures.
The RFI module is notorious for failing at some point and you get the symptoms you experienced, dead pump. Otherwise, you can disassemble the pump internals and clean them up and that might fix it as well. If you do a search in this forum on either MEP-002 or MEP-003 fuel pump you will get lots of information and pictures.
Last edited:
DOGWOODRIDGE
Member
- 30
- 3
- 8
- Location
- jackson, la
Thank you. I will try that. I do also have an MEP-003 generator. It would be nice to have a spare.
Sent from my iPhone using Tapatalk
DOGWOODRIDGE
Member
- 30
- 3
- 8
- Location
- jackson, la
Ray70
Well-known member
- 2,562
- 5,795
- 113
- Location
- West greenwich/RI
FYI, if you ever need another pump there are several others available in the $30 range that will work perfectly in your machine in a single pump setup. ( not sure if they are flow through or not )
Another tip is that if you are running the original 2 pump redundant system, unplug one pump. Why run both at the same time for no reason. Run one and if it someday quits, you have a spare already plumbed in, just plug her back in!
Another tip is that if you are running the original 2 pump redundant system, unplug one pump. Why run both at the same time for no reason. Run one and if it someday quits, you have a spare already plumbed in, just plug her back in!
- 16,662
- 23,800
- 113
- Location
- Burgkunstadt, Germany
Do you have any TM's or information on that set?
DOGWOODRIDGE
Member
- 30
- 3
- 8
- Location
- jackson, la
I’m sorry. I’m 78 and don’t know what a TM is. I downloaded the manual from Green Mountin if that’s what you mean. Has 3 hours on it.
Sent from my iPhone using Tapatalk
- 16,662
- 23,800
- 113
- Location
- Burgkunstadt, Germany
You need to stop saying sorry. Nothing wrong with not knowing something, and we are all still learning, up till the dude with the scythe knocks on the door. You got 12 years on me. We may be old, but we ain't dead.
A TM is a Technical Manual. The TM's are the what everyone needs to get smart about equipment. There is more then one TM for this gen set. G.M. tends to not have the latest changed TM's. The TM forum here in SS, Steel Soldiers is, on the whole a bit better.
When you need help, say something. That's what this forum is all about. The first two TM's are the engine TM's. The -24 TM is engine info, and maintenance info. The -24P is the parts info for the engine. The third TM is for the control box and main generator parts. The forth TM is for the conversion from gas engine to Diesel engine. Sometimes its mighty handy. The fifth TM is for the control panel and main generator, operator and maintenance info.
A TM is a Technical Manual. The TM's are the what everyone needs to get smart about equipment. There is more then one TM for this gen set. G.M. tends to not have the latest changed TM's. The TM forum here in SS, Steel Soldiers is, on the whole a bit better.
When you need help, say something. That's what this forum is all about. The first two TM's are the engine TM's. The -24 TM is engine info, and maintenance info. The -24P is the parts info for the engine. The third TM is for the control box and main generator parts. The forth TM is for the conversion from gas engine to Diesel engine. Sometimes its mighty handy. The fifth TM is for the control panel and main generator, operator and maintenance info.
DOGWOODRIDGE
Member
- 30
- 3
- 8
- Location
- jackson, la
DOGWOODRIDGE
Member
- 30
- 3
- 8
- Location
- jackson, la
Can you give me the pdf lists like this for my MEP-002 and MEP-003 please.
Sent from my iPhone using Tapatalk
Scoobyshep
Well-known member
- 1,089
- 1,400
- 113
- Location
- Florida
They can be found here https://www.steelsoldiers.com/forums/generator-and-electrical-tms.121/
- 16,662
- 23,800
- 113
- Location
- Burgkunstadt, Germany
Here are the TM's for the MEP-002A. Keep in mind, the 002A and 003A are almost the same. So you can use the 002A books for the 003A . Yes, there are a few differences, when ordering a VERY few parts. But by and large, the TM's are 99.99% interchangeable.
- 16,662
- 23,800
- 113
- Location
- Burgkunstadt, Germany
Here is the MEP-003A TM's.
- 16,662
- 23,800
- 113
- Location
- Burgkunstadt, Germany
Two other things that you can have. I would read the starter burnout message and check to see if yours has been updated.