• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. B

    GETT 23kw 120000btu - Applied Companies

    I'm at the point of frustration now with this thing. Changed the speed control box and no change. Anyone have an idea of where to go from here?
  2. B

    GETT 23kw 120000btu - Applied Companies

    Heres what I found for the speed box. So in the troubleshooting on steps 12 of that document, I'm getting way over 2vdc while cranking for step 4 and I'm only getting 9.65 vdc for step 3 while cranking
  3. B

    GETT 23kw 120000btu - Applied Companies

    i just ordered a new speed control box so hopefully that will fix my problem. Since I get voltage all the way to the box when it's on cold start but not when it's on normal, to me that says there isn't a short of some sort to the actuator. All the relays are good and the actuator works when it...
  4. B

    GETT 23kw 120000btu - Applied Companies

    Do you or someone yiu know have one one of these sets on hand to test if there is voltage at pins a and b on the speed box when it's on normal?
  5. B

    GETT 23kw 120000btu - Applied Companies

    si looking under the panel on the speed control unit, pins a and b are labeled actuator. When the selector switch is on normal, I don't get any voltage at those 2 pins. When it's on cold start, I get 22 volts. Would this be an indication that the speed control box is bad? I've rotated all relays...
  6. B

    GETT 23kw 120000btu - Applied Companies

    Does this magnetic pickup conmection look right?
  7. B

    GETT 23kw 120000btu - Applied Companies

    this thing is frustrating the heck out of me. If I can figure this thing out then I already have it sold.
  8. B

    GETT 23kw 120000btu - Applied Companies

    I'm guessing that module is under the control panel? Any idea on what pins to check?
  9. B

    GETT 23kw 120000btu - Applied Companies

    So I unplugged the magnetic pickup. When I cold start, the generator still ran and the magnetic pickup read 10.75 volts AC. Switched it to normal and it only cranks and shows 6.75 volts AC. I'm guessing the difference is the rpm but I didn't expect it to start either way. Any thoughts?
  10. B

    GETT 23kw 120000btu - Applied Companies

    Does this picture look like the magnetic pickup has been messed with before?
  11. B

    GETT 23kw 120000btu - Applied Companies

    should I take the magnetic pickup out and clean it? Does the TM specify how to test and adjust it correctly like it does with the mep generators?
  12. B

    GETT 23kw 120000btu - Applied Companies

    Is there a relay or something that could be bad?
  13. B

    GETT 23kw 120000btu - Applied Companies

    i did clean out the catch by taking out the screw on top and cleaning the screen and inside. I'm going to get a new oring deal for it in the morning just in case since it doesn't look brand new. If that doesn't do the trick, what else could it be? How do I get the governor actuator to show...
  14. B

    GETT 23kw 120000btu - Applied Companies

    so I just replaced every fuel line with brand new ones. Still running on only cold start. When I unplug the governor control and it's on normal, I don't hear any action but when I do it on cold start, I can hear the governor control actuating inside the IP. Any experience with this?
  15. B

    MEP-804b no voltage/hz issue

    To the OP, where did you find your new voltage regulator? I have 2 of these machines that need them but it seems the 15kw VR kits aren't as easily accessible as the 30 and 60kw machines. Any guidance is greatly appreciated
  16. B

    GETT 23kw 120000btu - Applied Companies

    if I leave it on normal, it will just crank and crank and never start. If I start it on cold start and then try to switch it to normal, it's like I hit the kill switch and kills the engine. If while it's running on cold start and I try to switch the selector to generator, same thing, it's like I...
  17. B

    GETT 23kw 120000btu - Applied Companies

    The engine starts right up and runs good as long as the cold start is on. With that said, if it was a bad fuel pump, Would that make sense?
  18. B

    GETT 23kw 120000btu - Applied Companies

    Still no luck with getting the GETT drash setup to run without being on cold start. Any other tricks you guys have experience with? Really need to get this thing fixed and moved
  19. B

    GETT 23kw 120000btu - Applied Companies

    Superman, do you have a voltage regulator kit for a MEP-804A? I was told you're the man to contact for them.
  20. B

    GETT 23kw 120000btu - Applied Companies

    does anyone have both manuals? Just bought one of these sets. Got the motor to run but will only run with the cold start switch on. Also, when I switch machine from off to generator, it shuts off. Shuts off if I turn the cold start off, even after the machine is up to operating temp. Any help or...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks