Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
You might want to do some testing with the disc blades before you “need” them, as they tend to be kind of brittle, however bigger typically tend to be tougher. If they hold up they may be a very good option for multiples in the sand….
Assuming your working with 3/8od tubing?
https://www.eaton.com/content/dam/eaton/hydraulics/hose-tubing-fittings-and-connectors/fc-documents_catalogs_brochures_articles/synflex-fc699-diesel-fuel-tubing-brochure-pll_1173.pdf
Synflex 3/8 diesel fuel tubing has an ever-so slight smaller ID and a...
https://www.zoro.com/zerex-antifreeze-coolant-1-gal-rtu-zxpcru1/i/G0555703/
This Zerex does specify IAT
“Application
Offers protection against liner pitting and hard-water scale deposits in heavy-duty diesel engines. Proprietary inhibitor chemistry helps protect all cooling system metals...
https://www.napaonline.com/en/p/ZRXZXPCRU1?cid=paidsearch_shopping_dcoe_google&store=27554&campaign=GSC-Chemicals&campaign_id=6478876245&adgroup_id=115972171828&adtype=pla&gclsrc=aw.ds&gad_source=1
Thinking this would be good to go as well…
This is 100% ethylene glycol, so you need to dilute it with distilled water, and I’m about 90% sure it is IAT due to it meeting all these pro OAT specs… “Hot Surface Aluminum protection requirements of ASTM test D4340 and Cummins Heavy Duty Low Silicate requirements, and is designed to meet the...
I was thinking a ring with the same OD as your adapter, same ID as the MRAP wheel bore, with the 10 bolt holes in them. That way no interference or extra stress on the studs.
Yep, thats how I had my first gen Bronco set up with a school bus heater in the 80’s as well! Even with the extra large, automatic beer can disposal holes in each of the floor boards, I didn’t need to put the junk hardtop on until January…
The stance looks perfect. If I’m seeing your pictures correctly, it looks as if your tie-rods are just barely rubbing the wheels? Maybe you could have spacer rings cut to go between the adapters and wheels, or trade someone with thicker adapters? How thick are yours? I can measure mine late this...
They look like Maxxpro wheels, but not the 8.25” bolt circle I thought the Maxxpro’s had? Are they aluminum, and what size tires do you have mounted on them?