Search results

What kind of issue? Post a picture so we can see if your set up is correct.

For a MRAP Husky mine detector. No bueno for a 5 ton.

Don’t forget most bump stops will squish quite far This is a different series truck m939, but gives you an idea of how much an empty cargo truck will give. Also I think your trucks have more axle outboard of the bump stops than these, which will allow more up travel when crossed up. A smooth...

See if this link works… https://www.steelsoldiers.com/threads/adding-a-block-heater-and-coolant-filter-on-6cta-8-3.131589/ I posted pictures of my install on this thread, a little different than the OP’s install.

Bump for @Defcon-1

Sorry, thought I read you where adding it as well as the block heater, I’ll see if I can dig up a link to a thread. This is the coolant I used https://mileslubricants.com/product/show/miles_evercool_(multi_duty_green_antifreeze)_(5_gallon) maybe @87cr250r can confirm it’s old school, non-ELC...

Thats what SCA additives are supposed to be for, or buy precharged coolant, you can also get precharged filters that will help maintain your SCA levels. Just as many horror stories running ELC in these older engines. After reading both sides of the debate, I went with cheap green precharged...

@tobyS probably does, and I believe he has a transmission for sale as well. Any Idea what fluid was in it before you changed it?

Yeh I’m thinking your tires are going to be a problem on the dunes as well as washboard. I’d see if you could find 50 miles of the worst washboard road around, and give the truck a shakedown. Having another lighter m35 to convoy, share, parts, and weight with would be very helpful. Maybe...

Can you post a link or picture of the of the item with title so we can search it?

Or one badass magnet!

Be careful, would hate to see anybody connect 8,000 amps worth of batteries, fighting each other, polarity reversed, especially at 24 volts!

Sorry to hear you got scammed but sounds like the typical ones that slip through from time to time. zpromax777 few post over the year since they have been a member seem to be just a little odd. Maybe @patracy can take a look at them and possibly suspend their account or at least PM...

No I was referring to the current style plug. Just curios as cougs is opposite of mine and 98gs.

Whats his SS user name, and what user recommended him?

Are there different design slave cable end’s where the positive and negative enter opposite sides?

No need to take the zerk out. Just push the needle tight up against the little check ball in the end of the fitting and pump. I screw my needle directly onto my guns hose instead of the zerk adapter shown in Mullaneys photo. Also they make needles in many different lengths.

You just need some better ramps!

I think I can reach all mine with my long needle tip. Reminds me about time to do this…