• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 86humv

    Registration in TX and the 10k gross weight limit

    Normally USMC truclks sf-97 don't say Off Road Only.
  2. 86humv

    Registration in TX and the 10k gross weight limit

    That Tx letter says numerous times :: vehicles with ownership evidence that indicates off-highway use . And at bottom of letter : Continue to issue passenger or truck registration for former military vehicles not identified for off-highway use and do not limit eligible registration to Antique...
  3. 86humv

    Sheared generator bracket bolts.

    TM 9-2320-387-24P late manual also does not show the long twist bracket being used in late surp on fig. 45A, but all late systems have them.
  4. 86humv

    Engine cover turnlock fasteners

    Got the whole thing
  5. 86humv

    Sheared generator bracket bolts.

    Looked at early and late manual...early says: 200 amp V belt and 100 and 200 amp Early surp uses little bracket. Late manual says use long bracket and does not ref. little bracket for same Early surp system.
  6. 86humv

    Sheared generator bracket bolts.

    Any truck with a serp system supposed to have the Long to the block bracket...the short one should only be on a 60 amp truck.
  7. 86humv

    Wait light troubleshooting

    This is somewhat common on the start box; Burnt parts.....and water damage
  8. 86humv

    Wait light troubleshooting

    I see you have a Nartron yellow label box...Remove it, open it up and see if anything is burnt inside.
  9. 86humv

    Wait light troubleshooting

    ........................ I tested sensors pin 3 & 6 with meter on Auto:.... 7 ea new and used KDS yellow band CR-2696A sensors = 12.5K ohm ...then 5 ea. Nartron 12480779-2 = 12.7 k ohms... then 4 ea.Nartron 12338772 = 7.0 to 13.5 Meg ohm......I had 1 ea. used Nartron 12469158-2 which did not...
  10. 86humv

    What antenna do I need for 450MHz?

    I looked up NSN's...the longer one appears to be for 30-80 mhz....so I'll send it with the short one.
  11. 86humv

    What antenna do I need for 450MHz?

    Sold first one...I may have another.
  12. 86humv

    What antenna do I need for 450MHz?

    The 2 different 1 pc element I have are: NSN 5985-01-288-9873...[ shorter one ] and the longer 1 pc element is a : NSN 5985-01-017-0784
  13. 86humv

    What antenna do I need for 450MHz?

    I think its 30-80 mhz.
  14. 86humv

    What antenna do I need for 450MHz?

    AS-3449 is in the range you want...$ 150 shipped
  15. 86humv

    What antenna do I need for 450MHz?

    I have a AS 3449/vsq-1, and a AB 1284/vsq-1 available.
  16. 86humv

    What antenna do I need for 450MHz?

    You hanging from a tree on that shot ?.....oh...thats right ...no trees out there.
  17. 86humv

    How to identify if m998 was rebuilt buy gov

    I have some uesd plates...11/98 =183xxx, 05/99= 184xxx, 01/00= 187xxx, 02/01= 193xxx, 06/01= 195xxx. 06/02= 201xxx...and so on.
  18. 86humv

    What antenna do I need for 450MHz?

    I might have one of those AS-3449 available
  19. 86humv

    Hmmwv radio tray question

    Upper tray
  20. 86humv

    Changing fluids on cooled differentials in my 1165

    1165a1 has radiator coolant also the transfercase is cooled the same ....There is a small heat exchanger inside cover....so you should not be getting radiator coolant when you open the fill, or drain.....Might have internal leak.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks