• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 86humv

    Lubing the speedo gear (red gear) question.

    No...but same stuff.
  2. 86humv

    Lubing the speedo gear (red gear) question.

    Gets it lube from trans fluid.
  3. 86humv

    Turret Support Pillar - M1045/6

    . That wide overlay roof comes off, and there is a standard aluminum roof under that,,,,that one in the pic shows an adapter ring for a 1114 / mrap bearing which is easier to find....but I bet that 36 hole ring adapter will be removed.
  4. 86humv

    Turret Support Pillar - M1045/6

    Thats a 900 series truck turret...but turret less square plate are Hmmwv..
  5. 86humv

    O ring for 12 bolt wheel ?

    Old 12 bolt has a bigger diameter Oring...groove is bigger, late 12 bolt and 24 bolt use red coated skinny Oring....small groove.
  6. 86humv

    12” Brake Caliper Driver Side Install Help me please~

    1165 is the same as a A2 frame wise...unless you have an 1165A1, 1152A1 Rev which has different rails, brakes, Etc...
  7. 86humv

    slant back gas struts

    Gamble...you getting these ? Another guy wants them.
  8. 86humv

    slant back gas struts

    Zip code please.
  9. 86humv

    slant back gas struts

    Mine are good...all 4 , $ 100 plus shipping. You will need 4 ea. clip retainers p.n. 12339617
  10. 86humv

    slant back gas struts

    I have used sets available.....not junk like those other guys.
  11. 86humv

    slant back gas struts

    You only got half...and they look bad.....you should have 2 long, 2 sort shocks, and 4 green tubes...2 of which will slide into the other 2....and if dented...they may not slide in.
  12. 86humv

    ID weird top?

    Its just a standard Amtech helmet top with added vents....probably had electronics in there.
  13. 86humv

    slant back gas struts

    Those shocks at Eastern are only half of what you need....there part numbers are lowers only but pic is of an upper. Upper tube has sticker only Upper and lower cylinder are different length. Lower tube slides into upper tube.
  14. 86humv

    Reed switch fuel sending unit

    Someone years ago told me on the float-less type...They carefully drilled the tiny fuel inlet holes bigger to allow fuel to go in and out faster, and it worked better.....I have a bunch of them....maybe I'll try it some day.
  15. 86humv

    6.5L Serpentine Belt Conversion

    You will need a 200 amp alt also...along with brackets, pullies, I have most metal parts available for early surp system.
  16. 86humv

    Passenger seat and battery cover.

    Battery cover is different on M1114....the battery box sits farther down so lid is flat and is aluminum.
  17. 86humv

    Basic/A2 steering wheel same size?

    Early wheel is slick green plastic, Later is textured black plastic.
  18. 86humv

    IbisTek Tire Retainer (Carrier)

    Thats a Rhino carrier...Ibistek uses a cable and crank system
  19. 86humv

    Starter bolt backed out and fried the starter

    40 is 24vdc + from light switch to shifter light .
  20. 86humv

    HMMWV Voltage High on Start

    You should use a multimeter to verify exactly what voltage you see before buying parts. .
110,074members
164,811threads
2,318,719posts
1,531online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks