Search results

Ya Steve i might talk a little bit much about things i like to do..But that's just a maybe;-)Making military trucks better is just one of my little gifts i also act as training wheels for 4x4 quads when offroad

I will pay shipping both ways..and i will get the brackets made up within a few days ..you are helping me as much as i would be helping you..i have been wanting to make these brackets for a long time now .i have the 800 and 900 series kits ready to release to so i really just need to have the a3...

If you send me the old bracket and pulley i will make you a kit to install a 27si delco alt .. i will make your bracket for free all you have to do is buy the alt which goes for around 115 brand new with a lifetime warranty.. pm me if interested.. the 27si is a 65 amp alt and has proven very...

i really like the bike hauler ..

Ok here is a few of my artsy stuff

Nice work looks like laser cut pieces...I build the 12 and 24 volt alt brackets for the duece as well as front and rear hitches for them to..i am now making alt brackets for the 800 and 900 series trucks to..i have built to much to list but some of my cooler things are my machines i built. my...

i have them listed in the classifieds with pics...

Wow very nice..congrats

Its been nice weather down here so far noone pulled a gimpy yet..the trail are rougher than ussual.but at least it is not just a big bowl of clay soup like it was for the fall rally

Also are you sure it is the trans not the transfer case making the noise?Does it change from gear to gear?does it go away in 4th gear?There is alot of diagonstics that must be done before condeming the trans as the problem?If it just gets worse with road speed and doesnt change with gear changes...

i would say the most common thing to make a transmission make noise next to the obivious things you would have seen while you had it apart like pitted teeth or bad bearings is a miss aligned bell housing..If the bell housing is not centered on the engine or the trans is not pulled all the way up...

Hmm?New pressure washer?Guess we know where to go for a free wash after haspin?We will fill in that sinking driveway for you.. :driver:

M123c and she probably wouldn't even notice anything..she might get suspicious if the oil puddle gets bigger or the driveway starts to sink from all the weight:-)

Sounds like it will happen at haspin if not sooner..:beer: ... Shift+R improves the quality of this image. Shift+A improves the quality of all images on this page.

Nathan remember it is always easier to to ask for forgiveness than it is to beg for permission?.Plus all these new products i am coming out with you might need to get a 10 ton to haul them down there for me?

If i am to take a trip to do this it would most likely be to someones house or shop and i would just bring my tools so i could finish the build there and have a fully functioning prototype.I know the guy that owns the museum would let me get some measurements and is about 100 miles from me and...

I would guess dayton is probably about 2 hrs away?If someone doesn't come thru soon i am probably gonna take a trip up to wis. to the military museum to get some measurements..If not maybe some one will be at haspin with a m932?I also need to test fit my 24 volt alt upgrade kit for the m900...

That would be the easiest way..ussually works best if I have a truck to get accurate measurements..if someone wants to donate their truck for a couple hours I will give them the hitch for free

Here are a couple pics of the drawings i did of the hitch.the first pic shows where the pieces of angle iron would be located.the second just shows the front and rear plates how they would look

I got the basic design all drawn up at lunch I will post some pics when I get home this evening..it looks really nice so far.very fitting for the back of the trucks