Search results

The MSC ones above look VERY similar to the ones that came with my helmet top

Rock auto sells the LARES 11430 steering gear for about $400. Just put one on my 86 M998 recently. They seem to go out of stock quickly.

Certainly looks like should have been an April 1 task... Or something you'd see on a jeep!

Been catching up on maint last couple weeks. Changed the fuel filter, and it was NASTY! so drained the tank thinking may be full of scum, but it was clean as a whistle. Did manage to spill a gallon or so of diesel though. This is first time I've done the filter, kept putting off as thought it...

The defrost lever does pull out farther than the heat lever. Defrost lever, pull all the way out for defrost both windows, Pull all the way out and push half way back in for defrost drivers side only, push all the way in for heat out heater and foot ducts.

Thanks for attaching the instructions! Was gonna have to go search for those as have the kit, but no paperwork.

Sounds very similar to mine

X doors do make a difference - much more rattling!

They are standard ports - may have grabbed a poor example photo

These are in the lines, 2 different sizes as on a normal A/C system

Mine is in a 998, but have two of the normal size AC valve in the lines near the evaporator. The ports on the dryer are where my low and high pressure switches are attached.

East Coast - Mike Vaden at Black Dog West Coast - Steven Kavanaugh at Retired War Horses

FYI: The shorter pintle hitch bracket for the Airlift Bumper with reinforcement plate installed is NSN 5340-01-506-7986 PN 12469170

IN

Seems like these could be bent out of sheet metal if had one as a pattern.

Ordered A2 steering wheel, Trannmission Mount, and a few misc seals and got them quickly.

Sometimes the simple things are overlooked... You say you took the batteries out and had them charged - Did you wire them correctly when you re-installed them? Picture might help someone here diagnose that portion.

I think trailworthyfab.com has 17" steel beadlocks for hmmwv. Don't know details - check with Todd Wooten at trailworthy. He's had pictures of his hmmwv with the 17" rims on some of the FB groups recently.

Passenger door after one round of stripper. Will probably do one more round of stripper, then get to sanding. Gel coat on this one gone or going in quite a few areas.

I think I saw where Michael Vaden at Black Dog Customs has a reverse switch kit. Also have this in my notes I copied off some board someplace: Reverse light switch: "I found the switch on eBay that already has the 3/4-16 threads. It is a Massey Ferguson Starter Safety Switch Part Number...