Search results

The ends of the hose from the hydro boost to the steering box are re-usable and you can take them off and put on new longer hoses for the winch. I bought hoses for rear winch since they were cheap and cut off and reused the ends from the hydro boost to steering box hose. Clamp large metal end...

"5.1.6.4. A lubricant contained inside the tires provides a smoke signal to the operatorindicating a flat has occurred." Really? Mine didn't work that way when running on run flat.

have a Rear winch mounting plate also

Have a few hmmwv parts I can bring if anyone interested: Original style drivers seat with base and pads NIB pair of front snowplow springs Doghouse cover std not turbo NIB Reddot A/C compressor for serpentine belt w 2 styles of mounts, few misc reddot brackets Maybe a couple other things - will...

Check blackdogcustoms.com

Posting this from facebook group at OP request. Contact Info: jillbarsky@gmail.com Hi all.. was referred to this group by one of the members... ***part needed*** ASAP‼️‼️‼️‼️‼️‼️ Have an emergency and I really need help please. I belong to an Animal Rescue Organization...

See new thread for 2019 KAMO Event: https://www.steelsoldiers.com/showthread.php?190205-Kamo-2019-october-11-13

Planning on attending

I have mounted the M1113 winch to the M998 and all works well and looks same as original. I've updated the document on converting the winch for the 998 and will attach as a pdf.

Interested also!

I'm no expert, but as you say this should be something simple and overlooked - unless control box is fried. OK, so batteries properly connected together. How about Front positive battery terminal to a body ground - some bare metal on body. If 24.5 there then ground is probably OK. Then start...

Maybe start at very simple. What is voltage from Positive of front battery to negative of back battery?

The item that sticks out in your statement for me is "my plan is to take some long adventure trips with my wife" to me that says most important thing to consider is a 4 speed instead of a 3 speed truck!

Does that match the number on the a pillar by drivers legs/on data plate? I'm guessing serial number of vehicle or a unit tracking number.

Yes they are the front springs for a HMMWV with a snow plow attachment

Here's a good price on the -2 springs, can't comment on suitability - bought a set but haven't used. http://armysurpluswarehouse.com/humvee-front-helical-compression-spring/?fbclid=IwAR2lIcsIp7uhxNeNwbvdK7wNvLqySUx4uL0HQr-ydEmVbyo0aZ5v3SpmAfE Admin- delete if link not allowed.

Yes, brackets 12469393-1 and -2 are needed to mount the winch plate. Have both of those.

Some results from my research and experiments so far: This winch is a front winch off an M1113 truck (M1113 has the extended nose). It's nearly a mirror image of the M998 winch. The M1114 rear winch does not have an attached solenoid valve body. The extra valve body on this winch is a...

Looks like difficult to fit M113 winch to front of m998, here is more material: https://www.steelsoldiers.com/showthread.php?177296-Miler-Marker-Hydraulic-Winch-Identification

Thx for the link - it would appear to be a M1113 winch from this info. Diagrams don't show the piece attached by the hydraulic hoses. Still trying to figure out if I should remove it from the circuit or use it. Has anyone put this model on a M998?