Search results

Know this is an old thread, but adding my experience with paint stripper in case it helps someone. My doors had several layers of cracked and chipping paint and some cracks and missing gel coat so need to get down to the gel coat to do repairs. Purchased the attached 'environmentally safe' and...

Would like to have a metal set. Don't want the flaps, but would like to have closeouts.

Here are photos Michael Vaden sent me showing mirror location

Dropping the drivers side mirror down the ~5" as was done on the A2 version helps quite a bit with that blind spot. You can see over the mirror and makes it lot easier to see pedestrians on the corner.

https://www.militarytruckworks.com/shop

Did you hook up the quick 4 so that it recognizes when you shift to low range? If so, how did you wire that in?

Btw I had no patience so I purchased a nortron smart start system for 300 thinking iT was definitely a control box issue. Is it something worth keeping on the side just in case ? Yes, worth having a spare and $300 sounds like a good price these days

If I understand what you are asking, it's the rear seat back that covers the rear foot wells when used as a 2 man truck. NSN #: 2540-01-188-3229 Part #: 12340051 p.s. I see an ad in the classifieds where someone is selling these seat backs and other 2 door parts though I see you already have...

The circled piece is the early mirror mount, they quit putting this mount on later trucks and older trucks were upgraded to the new style mirrors. Not sure exactly what year they dropped the old style mount from factory, but suspect it was probably mid to late 90's. Someone on here will know...

NG5XXX would be registration number - probably also stenciled on panel beside drivers left leg 200189 shows to be a 2002 serial number so I suspect that is not the original vin for your truck if it has original style seats. Does it have the original style mirror mounts?

Trailworthyfab has some 200 amp pull-off regulators http://www.trailworthyfab.com/Voltage-Regulator.html

https://gear-report.com/help-hmmwv-wont-start-humvee-glow-plug-start-system-maintenance https://gear-report.com/wp-content/uploads/2017/03/HMMWV-A1-Troubleshooting.pdf Before spending money, especially on an expensive s3 box I'd trouble shoot a bit. Test your glow plugs and see if any are...

That is the KDS s3 box - which I understand to be the best one to have

Sounds like you might ought to post a picture of your batteries and how you have them wired in

This may help: www.facebook.com/AmericanHumvee

Join some of the facebook HMMWV groups, trucks are often advertised there

My steering shaft seal #24 in drawing (red arrow) is torn and letting a lot of air into the cab, so plan to replace it. Part # 21 and #23 (blue arrow) says in TM USBL EFF 46162 1 AND ABOVE Which I take to mean only apply to vehicles above a certain serial number or something - can anyone...

Hope you're talking about the plate and not the seat ;-)

In my case I needed custom length hoses - Put a modified M1113 winch on an M998. Using existing fittings from steering to booster hose to add to cut off rear winch hoses from ebay worked well and was cheap.