Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Recently the needle on my speedometer began jerking. Are there any known fixes or issues on the speedometer cable? I assume the cable is easy to replace.
Perhaps if it was designed for LEDs and might work even better. However I found out, as I suspected, that the polarity for the bulb in the controller is reversed so a BA9S that is not polarity sensitive should work. This is a point that I imagine is far beyond the interest or comprehension of...
I have an 06 M1152A1. I replaced my turn signal bulbs with LED bulbs and they work with the original flasher. When I try to replace the bulb in the turn signal controller on the steering column, no LED bulb will work. The turn signal bulbs with flash normally but the LED bulb in the...
Replacing the switch will likely not fix the problem. To increase the travel of the switch, I put 3-4 washers between the switch and the switch mounting plate on the front screw of the mount only. You can loosen the rear screw to make it easier. You might need fewer or more washers. You will...
Action: I thought you were a nice and knowledgeable guy. I would respond with the following:
1. In reality the words restored and customized have subjective meanings and are often used in descriptions in different ways. I say restored because the truck is closer to restored than...
My street legal 2006 M1152A1 with less than 400 miles on it is for sale. I just completed a completed restoration and it looks and drives like new.
Please see the link below for pictures and more information:
https://www.us-surplus.com
Thanks again Action. I consulted my parts manual and see exactly what you mean. I recently rebuilt my doghouse but I had the same problem before. I have a new gasket on it and replaced the hardware. I'm going to try adjusting the bracket and I'll report back. I think this might do it.
Great video and info Mogman. Thank you.
Action - what screws do you mean? My springs are riveted directly to the body at the top of the engine cover. They don't seem adjustable at all.
I know this has been discussed in the past but does anyone know of a good alternative to these? Mine are a bit difficult to link in and turn. Any ideas?
I recently installed this and it sounds excellent. Bluetooth, 6 speakers, 500 watts with remote. It's from Ecogear. Acoustics a are large issue in HMMWV and thats why I built the carpeted tunnel cover you see below. The tube can be moved forward on the base.
Where are the best places to offer my truck for sale online? I'm selling my 2006 M1152A1 with 375 miles on it. I just completed a full restoration and made it a 4 man truck with new top, doors, seats and much more. It looks and runs like new. I know most here are looking for inexpensive...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!