Search results

Ok, another idea I want to run past everyone. When I got rid of my other truck, “24 volt” I had a 24-volt to 12-volt converter in it that I kept. The converter will handle up to 25 amps, but only has 10-gage wire coming out of it. Now the winch’s manual says it only uses up to 12 amps max, but...

Ya, after I sent the post, I realized I didn’t elaborate the subject. I was thinking of adding 12-volt alternator under the hood, and putting a battery box in the bed. Thanks, Nate

Info on Vacuum line's Hey, maddawg308 Where’d you get the “Vacuum line” diagrams? All mine are just plugged, but id like to get them right before I go to an electronic ignition. Thanks, Nate

Hay, anybody ever add a 2nd alternator and battery in the back? I want to toss in a small 4000lb utility winch in the bed, so I can get a hand lifting things into the back? Thanks, Nate

Anybody have an idea on where to get the clips that hold the bracket onto the window inside the door? Thanks, Nate

I can Email it to you, its about 2 meg's. Let me know. "Nateotto@mindspring.com"

Humm! That didn’t work. let me try something else. Im having a problem getting the images pixels down to below 640. Anybody got any ideas on how to do that?

Give me a minuet here, im trying to scan this info sheet and get it posted for everyone. Here we go, lets see if this works? Hope this helps, Nate

Id recommend calling Boyce Equipment, and asking for Bret, Mark, or Shiloh. Last time I talked to Bret, he said they had a number of Tec manuals for the M715 / M725. I just haven’t had time to investigate any farther. Ive got the Operators Manuel, which really isn’t anything, but ive also got...

If the radiator is on you r right, it goes the closest cylinder to the fan is 1, then 2, and so on threw 6. And if you look at the casing of you distributor as a rectangle, and on the right side, upper right corner next to the screw, is your number 1. Then going clock wise, the next is 4, then...

Found a tiny little piece of rubber hidden at the needle valve. After I run the tank down im going to take your advice and get the tank steamed cleaned like you suggested. Right now its running good, just a little hesitant shifting in-between 1st and 2ed. But ill recheck everything after I get...

Haven’t rebuilt this type of carb before, but have others. If it’s a vacuum leek, when I got it everything was pretty much plugged, and ran fine. If I can get the scamatics for that, ill redo everything. And I can’t see how I could have messed it up with the rebuilt being so simple. I have...

Haven’t rebuilt this type of carb before, but have others. If it’s a vacuum leek, when I got it everything was pretty much plugged, and ran fine. If I can get the scamatics for that, ill redo everything. And I can’t see how I could have messed it up with the rebuilt being so simple. I have...

Hey, my 1967, M 715, has been running great, started without ever even touching the gas peddle. But last week the O ring in the carb went out. Cleaned it out and rebuilt the whole card, reset the points, and now I have to press the gas peddle a number of times just to get it started, and as...

Just got them in, from, http://www.boyceequipment.com/ $300 bucks but makes a huge difference. There the “Selectro” Hey, thanks for the info.

I just totally redid my brake system from the master cylinder, lines, calipers shoes, everything, for around $350-$400 bucks. Main thing is to have a good flarer and ¼ inch pipe bender. Got 99% of the stuff from http://www.flmv.net:80/m715.htm Brake shoes, and emergency brake Everything...

It not my truck neither, but I just ordered some Super Swamper for my M715 stock rim’s and just got some inner tubes from a local place, tire’s from http://www.tirepackage.com SSR-57R 35x12.50R16.5LT 10 21/32 10.6 35.3 12.5 16.5x9.75 65 3640...

Nope The SUperWinch is the 30 spline not the 21 Thanks Nate

I have the real 1967, M715 Jeep Gladiator Military truck 1 ¼ ton, not the wagoneer, with a Dana 60 front end. When I pulled the Hub off, it has a 21 Spline axle with 6 large bolts holding the hub on, not Allen screws. Dose anyone know where to look for that? Thanks, Nate