Search results

double post... ready to delete!

Only the DCA and serial cable

I am getting this messages when I connect the MSD ice box to the Miltope. Does anyone know why and how I can fix it? Or what causes it? I tested the Ice box as suggested , and there is no short.

There is a seal on top of the tank that likes to go bad. Mine leaked when I filled the truck full during the hurricane.

I am getting this messages when I connect the MSD ice box to the Miltope. Does anyone know why and how I can fix it?

So do the NP 242 have this leak in the TC case cooler line happening less frequently? I am fairly sure , that I have a NP 242. It looks like what I can google up and I found a NP 218 earlier in this thread and what you can see doesn't look like mine. Also on my TC is some sensor or solenoid on...

What a freakin pain in the ... and that was the easy side :(

Intake valve spring is broken.

I bought mine for $30, that was very reasonable in my opinion.

There is some Clown on youtube, who promotes the idea of using flood lights as headlights , SMH. Yes, they are illegal on the streets.

I see... Was the tank in the way?

Did you have to unbolt the axle shafts? and were the shims slotted or did you have to pull the bolts out completely?

I am trying a different route by replacing the Vinyl with polycarbonate sheets.

the Issue I am having is that I don't have the plug. So I can't post a picture of it. There is just one connector plug that plugs into the Miltope Laptop on the power supply brick

could someone look and check and post the part number of the connector that goes to the power input of the laptop? I bought a charger unit, but it doesn't hooch on account that it has the wrong connector. My connector male connector on the laptop has 4 pins. Would you know the pin out maybe...

you think I could rent a cable for $200/Day? I have pretty much of the entire kit, minus this wire.

That's alright. Thank you for trying, Sir Wire Fox offered to get me the pinout and part numbers of the connectors. I may wind up making my own wire. Lets see

This is what the cable I need looks like

Hi FKAM Basically if you can figure out the ribbon cable, you can use any 2.5" IDE hard drive. I have to research it some more, but thinking about it a Panasonic tough book CF29 ribbon cable is IDE and looks very similar. I wouldn't be surprised if it would fit the connector. Then you'd just...