Search results

I took off various connectors and played Silicone spray in them. Also some down the hoses as much as I could. I noticed the connector on the lower right side had the color tight bot the rear end of the plug was able to twist. Not sure if that is supposed to be that way, But that could be an...

I was thinking of doing something like that myself. definitely something I am going to try now. thx TN

I'll check the pressure at the air tank today. The last tank has an air fitting on it, I bet it never gets drained properly . I'll then bypass the pressure valve and see if that kicks the CTIS on. But I have suspicions since I don't even have to start the truck for the fault to show up.

I noticed the exact same thing today. I would push the master Power switch and after a few flashes on highway all 5 lights would flash. If I unplug the unit and plug back in. It would again flash highway for a second or 2 and then go into the 5 button routine.

the two gauges show about 95PSI I cleaned off the valve with some brake cleaner, and it seems to not blow by every second. I took out all the fuses and relays and cleaned the contacts and re installed with some dielectric grease. I noticed one 25amp and a 10amp fuse is missing in pod 4 as well...

If it shows over pressure then what?

Pressure release valve on the side. Note that I have the newer model. ive been dumping the air a few times maybe that gets rid of moisture in the system

How about hints with the other issues , I've posted CTIS Air gauge Headlight high beam gauge, flickering work lights on all the time anyone had those problems and got a few tips?

So I recovered the truck and of course there are a few things I need to address . -The CTIS box blinks (all buttons) It keeps blinking even after I disconnected and reconnected it. I'll clean the contacts and clean the Ground spot and see what that will do. -The front air gauge periodically...

Got that.

This makes me think of something. Does anyone know a source for real CARC... woodland ?

THX well the DCA connector is the connector your (or better my) MSD ICE or ICE box connects to Thank you for helping, though.

You haven't seen it on your truck or someone else saw it? I of course looked right away but I don't see anything prominent

So back to my question, where is the DCA resistor in our HMMWV ? thanks to your great link we are able to verify that there is one, but where?

While I really appreciate your response. It doesn't help me , since you have no clue what you're talking about. i know to have read on this forum, ( it might have been in the CUCV section) ,that there is a resistor somewhere , I just want to have it verified by someone who knows. so while I...

I didn't say I found it. I said I came across it. When it connected my miltope

Your explanation doesn't make sense. Do you know what the DCA connector even is?

Did some PMCS today and came across the DCA ID resistor. Who knows where it is and what it's for?

How is that a 5th wheel RV?

I have to work with what I own