Search results

So I installed a C turbo on my truck and I thought the turbo was supposed to start whistling as soon as the truck was started. But I don't hear the whistle until I step on the accelerator. Is it supposed to whistle on start up or is it just my imagination?

I have full coverage from USAA on both my M1009 and duece.

FSOK might mean Fort Sill, Oklahoma. Mine has a FBNC rebuild decal so I am fairly certain that its from Fort Bragg, North Carolina.

Wish I could have PB, but I had a previous engagment at an unspecified location;-) Correct you were. Upon closer inspection the compresser right by the oil filters and block looks to be leaking. I have to get to that today and the rear valve cover was loose which I think may have caused the...

Awesome. Hopefully if I ever get time off work I will be able to make the trip for the next one.

1 leak down , ? more to go. I found this panel on the side of the injector leaking from the top bolt hole, it needed to be tightened. For some reason the oil leak seems to have disappeared, but I know all that oil had to come from somewhere.

Where is Camp Dirtbag usually held?

I have been putting it off til I had the time and the time is now here. When I put the "new" engine in my truck a few years ago I had a couple small fuel leaks from some of the lines going into the injector pump. Ididn't have time to fix it and it was in a bad spot so it has been leaking for a...

Well I made it just fine with the singled out rears. But she sure did bounce going over speed bumps. Thanks for all the info.

I believe there is. I have some oil/fuel leaks somewhere by the block and it will make it 10 times easier to track down the leak when the block is clean of all the oil on the side.

Another of my incessant questions. When singling out 9.00 x 20s on the rear do I use just the lug bolts or is there something else I should do also? It will only be for a short 25-30 mile trip. Any advice is welcomed. Thanks.

Like the title asks, what do you use to clean the junk (oil, etc) off of your duece engine? Any input is appreciated. Thanks.

Usaa

Thanks, I used part of the old bumper to make the mount. Here are a few pics.

Thanks guys, I have never seen that before in my truck. I thought the cold may have busted a gasket or something like that.

I drained my air tank when I got home from work today and when I walked out to close the valve I noticed a small puddle of oil under the tank. Anybody have any suggestions on what may cause oil to enter the air system? Thanks.

the M1009 is quite a bit more than the allowable weight (1500 lbs I believe). And I can still use the M105 for cargo as it doesn't weigh all that much.

The old bumper had some accident damage and it needed replacing and when the two were next to each other the new one was slightly different (larger, bent differently)

I finally finished the install of the winch onto my truck. It took about 8 hrs over 3 days and I got the cable on last night. The PTO was the hardest thing to install. And it works great. Here are some pics. They aren't step by step cause I got to excited after the first few steps to take more pics.

Welcome to the site. I will be getting stationed in Vegas in July next year. Hopefully there are others in that area and we can hang out and tell lies...I mean war stories:-D.