Search results

Info and photo cred to jacksmad1

The problem with the aluminum ones is they let air pass around them instead of through the fins. You need to fill in the gaps between the box and core with something or go with the 94553 core from spectra premium at autozone.the picture below shows a stock copper core a cheap aluminum core and...

LoL. I've been there with a broken linkage.

I GOT IT!!!! Ended up being the female black/ground prong was spread open in the connector at the. Base of the steering column. Pinched it back together and they are working. Thanks for the support. This forum is awesome!

Well.....I thoroughly cleaned the bulkhead connections with contact cleaner, brushes, and picks..also coated liberally with dielectric grease. A real joy that was. Still no wipers. It was something that was desperately needed so it was not for nothing but.....considering just hardwiring in some...

*heard

Thanks marcus and cpf. I was wondering about brake or carb cleaner. Will be getting some contact cleaner and dialectric grease. I have tead a tiny drill bit in reverse will clean the female connectors but seems sketchy. Anyone tried this?

Got it! There was a bolt in the center that on the outside that holds the connector together. Things are pretty cruddy in there. Gonna give it a good cleaning.

I am trying to remove the bulkhead connector inside. Removed the two bolts that hold it but the fuse panel won't separate. Am I missing something or should it just pull apartment? Don't want to break it.

I have not pulled the bulkhead connector. I will definitely do that tomorrow and let y'all know how I made out. Thanks.

Thanks for the replies mike,gunny, and cpf. I am getting somewhere. I learned to source the parts for an 84 and when I apply 12v and ground directly to the motor both speeds work even when feeding through the resistors. I also verified the switch is working by taking a reading on the plug when...

I also bought a new wiper motor for a k30ruck and it only has sockets for two plugs rather than the three the original one has. any ideas what the third plug does?

Hi all, I am a proud new owner of an 86' M10008 and the wipers and washer are not working at all. I found that I had no conductivity between the wiper motor case and the vehicle ground. I took the grounding strap off and cleaned it and reinstalled. I now have conductivity from the wiper motor...