Search results

I have 3 M151 ROPS kits assembled, pallet of parts and 8 tires and rims I need brought to Phoenix AZ, BUT if you are in that area heading west at all I still may get this to work.

Who is around or goes often to, Chambersburg, Pennsylvania GP that can pick up and hold items? I have 2 NOS 5 ton cargo tops to get picked up, would like to hold till I got a whole pallet together. So read into this holding for a month or so picking up another pallet later at the GP site, then...

Tennessee to AZ 3 pallets of MV parts - Open carry is fine Have 2 pallets of parts and rims, and 3 roll bar assemblies that can interlinked together to form 1 "pallet". Email me directly please artillerydan AT cox DOT net

$200 would be fine. Even if you don't build it someone will buy it from you for 3 or 4 times more at some point. Bring it in and save it from the torch.

Case USMC MC4000 Forklift manual NEED TM-04060B-15 This elusive manual is needed by many people out there. Someone, Somewhere has this. HELP THANKS!

Take a few overall pictures of the vehicle and the engine compartment. Also on the horn has a data plate with a date. That will give you a close date also. But some overall pictures tell a lot of the story for the trained eye.

South Chicago area - Need a piece of equipment put on a pallet. This is at a government facility in the downtown area. Equipment is a 3' x 3' x 6' tall specialized AC unit. It is currently sitting on the floor need you to bring a pallet and 2 cheap straps, rock the unit back, the site person...

2 - M10 Ammo Trailers from Pueblo Colorado area to Phoenix Arizona or close.email directly artillerydan @ cox.netTHANKS!

Would be willing to give you a finders fee to put me in touch with the seller, if you did not want it. Lot of work to bring it back to a normal jeep with a windshield. I would want it for what it is. Thanks!

I have two pieces of equipment sitting at Pendleton, South Carolina. I need someone that can make a pallet, and the agency can set the equipment on. Then strap it down to the pallet. Each piece about 6Tx6Lx3W. Obviously will pay for this.

I have been collecting parts for a future MTVR build for a few years. Wondering if anyone else is doing the same or know of any finally rebuilding one. Did that one in California ever get worked on or?

Well this should probably go in the "trailer" section but thought it appropriate that I continued Dave's thread. I bought this from Dave mid 2016. So here are the pictures of it coming together. This was done using the TM 9 ordnance two part primer & Paint. Shade #8 Still need a correct...

Yes that is a "Ben Hur" trailer, they were made by quite a few different manufacturers. Even with the modifications that looks like a great start. Someone will want if it you don't. Looks very straight, probably no rust on inside and the lunette and related is still up front. Big wins in this...

Yes he is right the M102 105mm howitzer uses these also, and would probably be the actual application as it only ran on singles. Also since they were upgrading the M102 with more weight in its final iterations and the fact it was air portable would make 100% sense. The date code on the boxes...

I have not looked it up, but these probably go to the M167 20mm Vulcan. It had M151 wheels with a spacer for running duals. This would be a guess but I will try and remember to look it up in the manual for the M167 tonight. Kinda cool if they are but sadly none of them in private hands... That I...

Jeep salad as they say. Kinda cool, built back when half cut jeeps where everywhere I am sure. Imagination was strong when it came to these 1/2 cut once running vehicles.

First installation of ROPS in an none ROPS M151 = 25% loss in value M151 & M151A1 rear suspension layout was the same as the front and the movement of the A arms. In line with "frame" in a Fast sharp turn can cause them to lift and or tuck an d or rollover. M151A2 Rear suspension arms are 90...

OK been a while since I laid all this out. I have the 2nd variation of the USMC FAV (restored) - Kit removed from demilled Ranger FAV (unrestored) - Some of the parts from a US Army Delta/Special Forces version (unrestored ). The two latter "parts kits" will be installed on Jeeps in the next few...

Yeah sorry those are not $100 rims. if you find a buyer I have 40 more to sell. M151 rims are still plentiful even new. $10 for used ugly, $20 -25 for clean used is a standard price $50 maybe $75 to the guy who just have to have new. Mag rims will sell for $100 ea maybe $150 if near new

looking for a new surplus or VERY clean MEP-15A 1.5 KW generator. This is part of a larger restoration of a specialty vehicle that I am rounding up parts for THANKS!