Search results

I use 32 x 11.50 x 15 BFG All Terrain tires on my M1009.

Ok I dropped a band new card off about a week ago and they are still looking at it. There is a lot of R&D cost in designing these things so the guy is doing it on the side as a favor. I can say that the problem we are running into are those two small black boxes in the center of the block...

Ok I'm a bit confused. Can we add the injectors to a 6.2 that has not been turboed?

I was wondering the same thing.

My company sells more fasteners than I can even begin to tell you about. Someone PM me the exact size that you would need and I will get a quote per unit. I shouldn't need a minimum order we can probably sell them individually.

Well as the saying goes look for the most simple answer and that will fix the problem. When I checked the vacuum at the modulator I should have checked the whole hose. It had a huge hole in the hose right where the metal line comes down and it couples too. I replaced the hose and now I can...

What brand was it?

Ok I got home and messed around a little with the vacuum regulator and that didn't yield any results other than making the truck shift later when I rotated it down. I checked the vacuum coming out of the hose that connects to the metal line that goes to the transmission. It was at about 11...

Well it just sits that way naturally so I didn't have to rotate it up to that position. I will see if I can adjust it any when I get home. I went and bought a vacuum gauge from O'reilly's and the pump tested at 24 in at the hose that connects to the vacuum regulator. I went ahead and ordered a...

I bought one new in the GM wrapper from Memphis Equipment. They sell them to the tune of about $240 though.

Just to add my opinion which I'm not sure is worth much, I preferred my Dodge Diesels with a 5-speed Nv4500. I bought a 2001 with an automatic and let me tell you that thing was a dog. I couldn't pull anything well with it. I also had numerous tranmission problems that the dealership just...

But not at 35 mph. I'm checking the vacuum pump tomorrow with a gauge to see if maybe that's the problem.

I'd talk him down to at the most $2500. I'd be willing to bet he didn't pay over $2000 for it. Plus if he starts screaming about low miles make sure you know he has no way to prove that the miles shown are accurate. Not trying to dissuade you, it may very well be a good truck. Just keep...

Ok I drove it to work this morning which is about an 8 mile trip. Before I left I went ahead and pulled the hose off the vacuum pump just to see if it was working at all and it was. I then took off and once again the truck is shifting at 35 mph. Sometimes it's smooth sometimes it's not. The...

I have a bench seat out a 1986 Suburban that should fit. I'll even throw in the horse blanket cover. If you pay shipping I'll just give it to you.

Well it's a CUCV so turbo 400.

How do I go about doing that? I assume there is a tool out there to check it?

Ok I replaced all my vacuum lines and the vacuum regulator on the side of my injector pump and I'm still having problems with hard shifting. I used an AC Delco regulator and ran the line from the top to the line going to the trans and the bottom port to the vacuum pump. Now here is the...

I tried adjusting the idle and it had a result but not the one I was looking for exactly. I got the truck started and as usual the light came on so I adjusted that screw. The only effect it had was that now instead of coming on and staying on it blinks of and off at idle. One thing that went...

I will let you know when I get over there to see it. It's front buckets which is the biggest thing I'm looking for.