Search results

Welded before, but need to get back into it. I'm looking at the Miller Auto 212. I like the idea of set and forget when welding. I'm mostly welding mild steel, up to 1/4 inch thick. Want something that's portable and will work off the bed of the truck. It can be 110 or 220 volt. I also have some...

Great install, BUT..... Some states don't allow this type of "open" system.... I hooked an aux tank to my GMC 3500, but it is isolated from the main tank by an electric valve. The installer explained that Texas does not allow an aux tank, without isolation from the main tank. The issue...

I've got 2 in the bags.... Here's the part # o.k. a lot of numbers 4020009086416 4020-00-908-6416 FSCM 8063 P/N SC-C-208747 Fiber Rope Assembly DLA500-89-C-0571

Good catch wreckerman!! Deep Cycle Marine batteries is exactly what you need. Now the question is, Can you find that big of a deep cycle battery with the amp/hr draw required? If you mount them inside the vehicle, you also need to vent them outside, the outgassing would not be a good thing as...

If you have that kind of load that you will use for an extended time, you will want to make sure you connect through a 1-2 switch that allows you to switch between battery "banks". When you have finished using the Aux batteries and if they don't have enough to start the truck, you can switch to...

WHY in the world do you want to add 2 more batteries to the truck???? These things have massive reserve capacity batteries in them already. We used to run our radios for hours without ever starting the vehicles. Mil radios were big AMP hogs, during use.....

"I know you were waiting for this. Read the -10 TM. It does a great job of telling you how to start, drive and stopthe truck and how to work everything on it along with everything that could have been on the truck. " Kinda harsh on the guy Tim, you presume he hasn't read the TM like SOOOO many...

WOW..... not making friends with a response like that.... If you are used to ordering parts for Civy trucks, then pretend the TM -34P is your parts ordering book. READ THE BOOK!!!! then ask questions!!!! Do you have a copy of the -34P?

It's all relative to what you do to the stock vehicle. If you put 33's on it you get a little better clearance, put 37's and a 6" lift then even better, but you sacrifice driveability with the more height you try to get, also need to consider changes in driveshaft angle and other issues. More...

Most GL sites will work with you on the 10 day window, so if you want the item, your choice. If you dump the item, you still end up paying them something for the PLEASURE..... of not doing business with them. I think you can fax the payment info to them, they will have the correct info and...

I just replaced the door locks on my M1009 with the cylinders from LMC. The issue is that the cylinders only allow the key to be removed when the door is locked! You unlock the door, but the key will not come out of the cylinder..... you have to re-lock the door to get the key out.... WHAT HAVE...

BLUE2, I was IN, 21 years in! I too had to deal with the constant shortage of parts for my Company vehicles, M60A3's, M901's, M113's, dueces, 5-tons and everything else. When we circle x'd a vehicle, I instructed ALL drivers and mechanics IT was OFF LIMITS for cannibalization. When the part need...

The M1009 has Corporate 10 bolt axles front and rear with 3.08 gear ratio and a Gov-Lok in the rear. The front axle is open. Straight from the WIKI page

In the last few days.... I have replaced all the belts. replaced DS alternator, did the Doghead relay conversion checked all the fluids Oh yea helped my son pull one of his "buddies" out of mud..... M1009 didn't even break a sweat!!!!!

Blue2....... I hope YOU'RE kiddin about "borrowing" parts off the boneyard vehicles..... I would hope to never get a vehicle that parts had been "pilferred" from!!!! $20 in parts isn't worth a trip to the slammer!!!! I would NEVER want to go to WAR with a BARRACKS Thief!!!!! Man UP and buy...

I've been using the oil I pull out of it, and my other vehicles, with each oil change..... I run it through 2 - 10 micron filters that I rigged up and works just great. Anybody see an issue with running the old oil and saving money? I put in about 1 quart every fill up

****The front springs are 3 inch wide 56 inch long and the rear springs are 2 1/2 inch wide 52 inch long. . ***** That's straight from the wiki for M1009. So yours if stock are 56 inch springs. I did a 4" lift on mine. Springs in the front and blocks in the rear. The stance is GREAT. I put...

I always find what I didn't as the last thing I check!!!!!! And then I do something else the next day and the circle begins again!!!!!rofl

It got to 60 today so I went after the heater issue. I took the bottom vent off in the vehicle and tried to fish anything out of the passages. I got nothing out of the vent going up to core. I think the big problem is the "cold air" intake on the vehicle that is always open. I can get all kinds...

We dont get the cold that the north gets but its been cold around here for the last week. I went out this morning to warm up truck and because we had an ice storm last night, I decided to turn the defrost on to do the windshield. I went back out about twenty minutes later and the truck was...