Search results

The Topkick installation position doesn't clear the LMTV doghouse. I build and sell a kit for the 3116 that uses a commercial 200A 24v alternator.

Wow.... Someone didn't get their delivery....

Is it possible to switch to a brushless DC motor? Does anyone have the current fan motor specs?

He's a new member, so there's always a learning curve...

Fixed. He tried to contact me via ebay and doesn't seem to be able to get to our PM's

Sent you a message.

I've put on 2 coats of the Lizard Skin soundproofing on the entire inside of the cab, plus underneath. Never thought to try how thick it could go? I did top the underside of the cab with their black CI coating against engine heat, then topped it with Bed Armor against abrasion. I may contact...

I shot (white) Lizard Skin Ceramic insulation on the roof, then top coated it with white automotive paint. On the inside I have 1.5" closed cell foam going under the headliner. The difference of inside temps was distinct between the before and after of the Lizard Skin.

With my intended use of the M1079 as an offroad camping rig I copied what I did on my previous truck, which also has a parasitic draw... (I added the Bussman Equalizer though) The 4 battery bank is split into 2+2 separated by a Smart Isolator Disconnect, which is wired for the starter on 2...

Taliban could list them on GovPlanet lol.

No oil line will flow more than the smallest internal diameter of any associated fitting....

So this is happening in Maine!!! It won't take much for them to follow the Colorado move and declare military vehicles as being designed for offroad use.... These Blue states.... “‘Off-road vehicle’ means a motor vehicle that, because of the vehicle’s design and, configuration, original...

His video has no schematic, and I wanted to split the seat and back heaters.

I have, and covered it on one of the FB forums. They have a temp sensor in the seat bottom that I did not use. I separated the seat and back and used a dual 5 position control for each seat. https://www.facebook.com/groups/154125488331132/permalink/1087108721699466/

The engine cowling is a bit more complex than "2 seams" there's a lot of curvature going on. It cost me $400 for the automotive carpet, and I provided the pattern and the base material for the carpet to be glued and down onto.

I shot the Lizard Skin soundproofing both inside and under the cab, several coats. Then the Lizard Skin Ceramic Insulation underneath on top of the soundproofing per their instructions. Like others said, I found corrosion under the interior floor coating, so that was all stripped off, treated...

The 6" hose length is a little tight, 8" might work better. There's folks selling kits if you don't want to shop for yourself... The markup is significant.

Fittings from Discount hydraulic hose, teflon brake line from ebay. Total cost a little over $20.

I've got a 3116 block you can have cheap

Battery tester