Search results

All they (LAU) do is add a second harness to the glow plugs. You will need to reattach your primary glow plug harness. NOT HARD.

God Bless America!

No way anyone was trying to insult you... These rigs are typically missing parts and have loosened parts, so seems to me that you were being reminded to do your due diligence. IMHO. Belated WELCOME!

Guys, I'm on the lookout for old bad burnt out N3135 units for my little reverse engineering project. Please feel free to PM me if you're willing to part with any dead N3135 regulators, and thank you. TIA, T

These are not shift on the fly transfer cases my friend.

👆 What he said 👆

Sometimes you need to buy a heater core meant for something else and then cut off the intakes and either make or TIG weld or connect with rubber hose to make it fit your function.

I figured it was Deutschland. But you are probably more correct Hunvee

Mighty fine rig! Welcome! FYI all technical manuals/TM’s are free here for these vehicles.

Replace the brass filter sock in the tank. It is also a source of merriment.

I’ve read these truck are more efficient about 210 BUT I prefer not cracking heads and blocks. As usual RWH/ Steve is absolutely correct.

Your dash thermostat and accurate temperatures are two separate things. A laser thermometer is more accurate. If you upgrade to a hydrostatic clutch, you can bend the spring to modify it to turn in at lower temps. You should also clean your stack and use a 180 degree radiator valve. Clean your...

Camo was and is radio/electronic former military guy. Don’t trust the built in meters and always defer to separate voltmeter and ammeter. Might wanna listen to him. Just sayin’. Also, I found and keep finding working bargain regulators on a certain website for less than $200.

I have not seen any follow up replies from the OP. He has not logged into the forum since midnight last night.

1: drain the old fuel from the tank. It is not a good idea to try to use it. 2: fuel lines have check valves that get clogged. You need to remove them.The sock at the end of the fuel intake in the tank gets fouled and blocked… check and/or replace it. 3: with check valves removes and fuel...

Sometimes it’s the little things…

As always, you’re an awesome fund of helpful info. Thanks!!!

What do you call the three inch ring of soft metal b/t exhaust y-pipe and water fording exhaust pipe? I'm installing a water fording exhaust pipe and I need to buy that ring from a local muffler shoppe. I'd like to call it by the correct name

Manual box works well. Never press the button over 5 seconds at a time or you’ll be replacing more plugs.

https://www.steelsoldiers.com/threads/how-to-bypass-pcb-i-am-aware-some-hmmwv-owners-have-done-it.182560/ Lose the mosfets KurtVK