• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. ida34

    mobile home axles for non-mobile home trailers

    Michigan Motor Vehicle Code Basically, there is no specific exemption of Mobile Home Tires but it the tires are marked not for highway use then they are not to be used no the highway and can get you a ticket. There are other markings also. See below. 257.710 Tires; studs or other traction...
  2. ida34

    OEM engine paint for Multifuel ??

    Check Rapco or other vendor of military paints. Mine is still semigloss OD.
  3. ida34

    Need some help researching the history of my deuce

    Not all vehicles deployed got painted. None of our vehicles got painted. There was not time. We had our stuff on ships within a week. I was forward deployed to the 101st ABN but my battalion headquarters was at Bragg with the 82nd ABN. We were technically an 18 ABN Corps assest so we left before...
  4. ida34

    WTB: M818 or XM818 VIN data plate

    RE: plate Can't beat that deal. I would jump on it.
  5. ida34

    does your deuce lean???

    Stealing my thunder on quoting MI law I see.
  6. ida34

    auxiliary fuel tank

    Re: RE: auxiliary fuel tank I brought up the stock 40 gallon tank in the first few posts. Mine was on a 75 Blazer.
  7. ida34

    GL Trouble

    Vehicles classified as scrap but that look fine seem to go for the same or comparable prices.
  8. ida34

    Electric Gremlin-- M1009

    RE: Re: RE: Electric Gremlin-- M1009 The starter is not going to cause your dash lights not to come on and such. You need to track the power from the batteries both in the 24 volt side and the 12 volt side from to the ground in the ignition circuit. I know you say that you do not work well with...
  9. ida34

    M818 Plate Location

    I like to post the law (cut and past) because so much is screwed up by word of mouth.
  10. ida34

    M818 Plate Location

    Do you have a light illuminating it at night? :lol:
  11. ida34

    Need items to complete two Vic-1 installations.

    RE: Re: Need items to complete two Vic-1 installations. I saw the connectors at Fair. They do not have cables. As a last resort I will try to make one with the ends they have. Thanks for the input.
  12. ida34

    Ham Radio Operators / Steel Soldiers

    RE: K3TZJ Here I went with my son and daughter to a one day course for your Tech. We had a study guide and studied beforehand. My son and I passed. I used to be in radios while I was in CAP during the 80's so it was pretty easy to pass for me. My daughter did not pass but studied hard and two...
  13. ida34

    What do you do for batt maint?

    I just cleaned and used terminal sealer on my cables today.
  14. ida34

    Need items to complete two Vic-1 installations.

    RE: Re: Need items to complete two Vic-1 installations. Ok I am all set except for two CX-10613/G cables. They are the input power cables for the Mx-7777. I have been told that it is the same cable that powers the GRC-106 radio. I have high bid on one on ebay but still need another one Haney is...
  15. ida34

    M818 Plate Location

    All states are front for tractors. Even some 1 tons with fifth wheels or goosenecks qualify for the plate to be on the front in some states like Tennessee. It optional in some states and you can put the plate on the rear but Michigan requires the plate to be on the front of a tractor. The law is...
  16. ida34

    900-20 to 11-20's on a m34

    RE: I Ment to say M35 a2 !!!!!!!!! An M34 has a different bed that is lower but it has wheel wells in the bed for clearance. The M35s bed is mounted higher so that there are no wheel wells. Either one can be dualed or singled. The deuce above has an M34 bed the one in my avatar is an M35 bed.
  17. ida34

    900-20 to 11-20's on a m34

    RE: 900-20 to 11-20 Do a search for flipping the rear hubs. You take apart the rear hubs and put them back together backwards and the wheels will then all track on a single track. The hubs are one way for duals and the other for singles. you can run the same tires but I think the original M34...
  18. ida34

    M62 wrecker questions

    I don't know about the wrecker for sure the 60's hydraulic loader on my tractor only had a metal strainer until I plumbed in a screw on filter.
  19. ida34

    Got to drive my first 5 ton

    RE: Re: RE: Got to drive my first 5 ton No problem. I am planning on towing but if it runs it would be nice just to drive it home. Let me know what you guys find out. Kip has the info. Thanks Chuck
  20. ida34

    video and pics of our 5 ton fighting fire

    You should register for Motor Muster at Greenfield Village. We usually have a pretty good showing of MVs and your firetruck would be great addition.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks