Search results

Some people will do anything to raise their post numbers. I made a mistake in my earlier post. I am running 96 to 127. Chuck

I am going 69 to 127 on Saturday. I get on 69 in Howell. I am not sure of what time. The deuce has another axle leak so the cucv will be going.

That is the voltage regulator.

Do you have any of the current small black stars for the middle of the bumper? Also how much for bumper numbers such as "101ABN 5/8FAR and C19" for a deuce. I think it is 3 inch and the same for a Cucv except change the c19 for C5. I think they are 2 inch. Thanks Chuck

When I worked at a radiator shop in the late 80's we did a procedure that lined the tank and had a lifetime warranty. It would seal all the pin holes and it would also seal the rust in. I would check with a good radiator shop and ask if they still do this.

Glad to hear it sold. I would offer my services but they are probably already out of my area.

Re: RE: The first pics of my HEMTT project ! When I was at Fort Campbell we had one off our gun trucks get stuck while trying to leave a firing position after an all night rain. The 15000 lbs M198 howitzer is quite a drag on the five tons. We had 900 series five tons with a winch because of...

Too bad you were not closer to northern Indiana.

The way things are going I should be able to wait until then no problem. After that it will probably sit for a couple of years until I get it put on the trailer. I tried to get a cheap 105 to part out but they went too high close to home. Thanks Kenny.

Anyone parting a trailer out, I need the cast piece that the landing leg attaches to between the frame rails on the A frame. I talked to Kenny about his from his rusted out buffalo but it sounds like he is not parting it for a while. Pm if you can help. Chuck

I need one also if anyone has one around MI.

Re: RE: Updated my post with pics I was really trying not to make a comment like this. rofl

So much for trying to redirect this hijacked post. Nice trailer.

Nice trailer James. I am waiting on my EUC for my m105 from the last GL auction.

I will try the feature now and I really don't have a problem with the watermark either way.

The ether kit has a temp sensor that will not allow the valve to activate unless it is below 20 degrees. You could bypass it but when you push the switch a measured amount of ether is allowed to stage in the valve. You should hold it for a few seconds. Then when you let go of the switch the...

Finished? Is anything ever finished in this hobby? You might just ask for the latest pics instead.

Thanks for the info. I am going to monitor the level and if it is leaking I will drop you a PM.

I finally got around to checking the brakes on my M103 Trailer. Everything went great and the brakes worked fine. I did the check from the -14 that had me putting a small stick into a hole on the Air pack to make sure it was moving in and out. It worked but all the holes on the air pack were...

How may axles had brakes on your trailer. I was thinking that more axles would pull more current. I am going to check the draw of my trailer before I put together my set up. I got an old large multi path relay off ebay and I have a 10 amp converter. I had thought about putting a 12 volt battery...