Search results

I'm having a weird issue. The exposed line coming out of the compressor is very cold and builds up frost. The picture attached is after running it overnight. Does anyone else's do this? With my other acutemp fridge, both lines coming out of the compressor are hot to the touch, unlike this...

AcuTemp is still in business and service these units. They were bought by CSafe Global. I contacted them and they helped me.

While I personally don't know the answer, I was diagnosing a problem with my unit with acutemp they said that in order to run on 24v your batteries have to be decently charged before. Maybe that is something similar to your problem.

I am in the Desert Storm unit and the one organizing the military vehicles for the DS unit. I don't know what I am driving currently, but for sure I will be bringing a CUCV and HMMWV. If I get more drivers I can bring more of my vehicles.

You're welcome to be in our unit.

Are you marching with the Desert Storm unit or with a different unit?

2020 Desert Storm Memorial Day Parade. 25 May 2020 We have been asked to bring military vehicles to the Washington, D.C. Memorial Day Parade. This is the one that goes right down Pennsylvania Avenue. We are attached to the Desert Storm unit of the parade. You do not need to be a Desert Storm...

The heat coming out of mine is noticeable, but not ridiculous. The heat output is half of what the BTU rating is on unit, ie, a 36,000 BTU unit puts out 36,000 BTU AC, 18,000 BTU heat. My units will have the motor pool at temp in around an hour. Have you checked the air filter? It could be...

You may want to consider staying with a stock cucv charging system. The 200 amp alternator puts out 200 amps 24 V, DC. Last time I checked, the 12V DC output on it was only around 40 amps. On my cucv, I have dual 60 amp alternators that have run all my accessories without issue, most notably my...

You are incorrect. There is no #26 in the harness where it screws into the light switch. The correct horn wire is 467A.

Does anyone know the wire number for the horn where it plugs into the light switch? I was half asleep last night when I was wiring my backup lights and tapped into 40 instead, which is the panel lights.

This may help you for overall dimensions, it's the dataplate on my trailer.

I bought one of these from the same auction. Be sure to inspect them in person when you pick it up. My AC unit was shot twice, one of them being a 50 cal. I had a broker pick it up, wish I had done it myself so I could have refused it on site instead of now having to deal with the ironclad...

Does your have a catalytic converter in it? If not all you need is the muffler and 2 exhaust seals. I replace all the bolts when I've done mine.

These are rated at 3000 PSI.

These brass fittings are high pressure rated. The PSI supplied to the winch is less than the PS Pump puts out. The hose it takes the place of is the one that runs from the steering gear box to the hydrobooster.

Good ideas. When I have the wire harness next week I'll do this.

I have always wanted a rear winch on this HMMWV because I use it as a work vehicle around the farm, hauling branches, trees, etc. and a rear winch cable would be very useful. I was lucky to pick up a front milemarker winch for very cheap near me. I wanted to be somewhat military correct when I...

I've been noticing a ether smell lately with this cold weather when starting, I think mine is automatically doing it too.

Installed a Warn military 9k 24v winch in the rain yesterday