- 14,639
- 4,820
- 113
- Location
- Buchanan, GA
Did you know you can subscribe to a thread without making a post? Just click on the thread tools option at the top of the thread and select subscribe.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
5 ton lockout hubs
- Thread starter adamsoffroadperformance
- Start date
jatonka
Well-known member
- 1,802
- 87
- 48
- Location
- Ephratah, New York
how do I find the website of the person making the 5 ton locking hubs?
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
still working
- 14,639
- 4,820
- 113
- Location
- Buchanan, GA
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
3d printed the housing last night, took 12 hours but can check measurements now ,
once done off to CNC machine.
once done off to CNC machine.
leo4x4
Member
- 317
- 7
- 18
- Location
- Shadow Hills, CA
i would be interested
- 12,195
- 325
- 0
- Location
- gainesville, ga.
Just want to remind everyone, that these hubs will ONLY work as intended on 939 trucks because of the front drive air shift disconnect, if you use the hubs on a sprag transfer, the transfer WILL think that the rears ARE spinning (over running the front wheels)and engage the front drive, driving the third member
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
engagement gear hot off the press
Ddmk18
Member
- 272
- 2
- 18
- Location
- James Creek PA
Will these work on the a2 models with the ctis?
74M35A2
Well-known member
- 4,145
- 330
- 83
- Location
- Livonia, MI
Check my thinking, but one could also add one of these to any one of the 4 rear hubs in order to make the truck single rear axle drive, therefore eliminating any wind-up that occurs between the intermediate and rear axle. So, a decent setup of this on a 9 series would be to buy 3 per truck....?
Nice to see somebody making measurable headway on this. Hats off to you bud!
Nice to see somebody making measurable headway on this. Hats off to you bud!
I have a pair of extra drive flanges that I am going to get the splines machined out of and use those in my truck for now, but I would be interested in a pair of your lockers when they are finished so that I don't have to get out and bolt in my splined flanges after I am already stuck. Do you have an idea roughly on the price yet?
74M35A2
Well-known member
- 4,145
- 330
- 83
- Location
- Livonia, MI
That's she said.
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
Printed axle gear at 100 percent size last night to check fit and sliped on like a glove, this is starting to get fun,.
todds112
Member
- 672
- 5
- 18
- Location
- Teton Valley, ID
Wow, technology is cool.
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
Need some input on what alloy to machine hubs starting this week!
Any sugestions ?
Any sugestions ?
- 14,639
- 4,820
- 113
- Location
- Buchanan, GA
162tcat
Active member
- 710
- 46
- 28
- Location
- Washington
Any updates?
Ddmk18
Member
- 272
- 2
- 18
- Location
- James Creek PA
Fingers crossed he's still moving forward with this project.