DavidWymore
Well-known member
- 1,598
- 164
- 63
- Location
- El Centro, CA
DOT 5 is like 24v. Yeah, better, but I don't want a unicorn. I want simple ,standard, familiar ,available stuff.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Got a Deuce! '62 M35A1
- Thread starter DavidWymore
- Start date
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
David, there is very little difference in the trucks not because of the bed or weight or tires, but the trucks axles and motor.
The trucks are severely limited because the motor puts out about 100hp and the axles have a 7:1 ratio. Its old tech that works great off road and minimally on road. It is what it is and I have accepted it.
On the topic of dot 3 vs dot 5, its ignorant to think there is a difference that anyone would ever notice.
The trucks are severely limited because the motor puts out about 100hp and the axles have a 7:1 ratio. Its old tech that works great off road and minimally on road. It is what it is and I have accepted it.
On the topic of dot 3 vs dot 5, its ignorant to think there is a difference that anyone would ever notice.
DavidWymore
Well-known member
- 1,598
- 164
- 63
- Location
- El Centro, CA
...so are you going to be investigating that? 
ROTFL, haha
ROTFL, haha
DavidWymore
Well-known member
- 1,598
- 164
- 63
- Location
- El Centro, CA
All the brake fluid talk and research made me decide to change the fluid in my '95 dodge the other day. I don't know if it has ever been changed. It was brown, but the brakes still work fine. Same thing with my '70 dodge. It's going to good use stripping civvy paint off the deuce.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Investigating what? I have put a LDS motor in my truck and I have 395s on it. Thats about the best I can do other than going way custom. I still plan on putting a 5ton air filter on to help her breath better, but thats for later on.
DavidWymore
Well-known member
- 1,598
- 164
- 63
- Location
- El Centro, CA
I will be running the truck in the desert. Some sand dunes and narrow canyons. I know smaller and lighter weight and a warm LDS 465 will help in the dunes. I may be new to deuces, but I am an experienced offroader/builder. Been doing nothing else in my free time for the last 15 years. I've run/built a Jeep, Blazer, and current big Cummins Dodge. They all perform differently and do better or worse in different terrain.
I know lightening the back end may be counterproductive. I was kicking around the idea of a gooseneck hitch that a bed could be latched onto when needed. I guess talking about it is pointless, it's alresdy basically an M48, will try it as such when the brakes are done and go from there.
I know lightening the back end may be counterproductive. I was kicking around the idea of a gooseneck hitch that a bed could be latched onto when needed. I guess talking about it is pointless, it's alresdy basically an M48, will try it as such when the brakes are done and go from there.
DavidWymore
Well-known member
- 1,598
- 164
- 63
- Location
- El Centro, CA
I was joking about the investigation due to your sig line.
I have also thought about cutting brakes (dual circuit) and or lockers...time to move to the other deuce forum I guess.
I have also thought about cutting brakes (dual circuit) and or lockers...time to move to the other deuce forum I guess.
stb64
Member
- 162
- 15
- 18
- Location
- hohenfels germany
The military used regular brake fluid (called HB in the older lube orders) before switching over to DOT5. One of the reasons for using DOT5 was beeing able to keep huge amounts of vehicles in storage, often parked outside, without having to worry about regular brake fluid changes, only to find the brake cylinders all rusted when you needed the truck.
So using DOT3 is perfectly ok, as long as you do your brake maintenance.
So using DOT3 is perfectly ok, as long as you do your brake maintenance.
DavidWymore
Well-known member
- 1,598
- 164
- 63
- Location
- El Centro, CA
So far, pretty much all of the axles I have taken apart have had the grease washed out of the hubs by oil whether they had the little wedges or not. I think that's because the bearing and seal washer don't actually seal to the spindle.
Idea is to put a thin bead of gear oil specific RTV where the yellow paint lines are to seal the bearing and seal plate to the spindle.
Idea is to put a thin bead of gear oil specific RTV where the yellow paint lines are to seal the bearing and seal plate to the spindle.
Attachments
Last edited:
red
Active member
- 1,988
- 25
- 38
- Location
- Eagle Mountain/Utah
My experience in sand with 395's is that the deuce does great. Your weight distribution across the 6 tires is good.
DavidWymore
Well-known member
- 1,598
- 164
- 63
- Location
- El Centro, CA
Yeah, there's a guy up in OR with a truck that looks like yours that has some vids on youtube, turned up and 395s, does good in the dunes. Course that sand might be damp, big difference to the dry sugar sand here.
Jeepsinker
Well-known member
- 5,399
- 456
- 83
- Location
- Dry Creek, Louisiana
You don't need to put that much silicone when you pack the bearings. Just be sure to have the keyway clean and pack it up good with gear oil specific silicone before and after the seal install.
DavidWymore
Well-known member
- 1,598
- 164
- 63
- Location
- El Centro, CA
Time to quit playing around with deuce #2 and get the brakes and wheels back on this one so its mobile and I can get it out of the bay it's hogging in the shop. It's getting embarrassing having it sit here this long.
I hate brakes.
I hate brakes.
Another Ahab
Well-known member
- 17,995
- 4,548
- 113
- Location
- Alexandria, VA
red
Active member
- 1,988
- 25
- 38
- Location
- Eagle Mountain/Utah
Wwwweeeeeeeee......uh oh
DavidWymore
Well-known member
- 1,598
- 164
- 63
- Location
- El Centro, CA
Looks like fun to me!
I should say I don't like repairing brakes...
I should say I don't like repairing brakes...
rustystud
Well-known member
- 9,266
- 2,962
- 113
- Location
- Woodinville, Washington
e
Take it from someone who has done it. It is not fun at all ! I would have crapped myself if I wasn't squeezing my butt cheeks so tight ! That's what they call the "sphincter" factor !
mobileauto2000
Member
- 718
- 9
- 18
- Location
- Springfield Or
Do tell the tail please.
Jeepsinker
Well-known member
- 5,399
- 456
- 83
- Location
- Dry Creek, Louisiana
I've seen that truck ramp countless times in my life. That is one of the ones on the westbound side of I-70, west of Denver and Golden.
rustystud
Well-known member
- 9,266
- 2,962
- 113
- Location
- Woodinville, Washington
My buddy and his girl friend and I where in a 1 ton GMC dually towing back a 1952 Studebaker REO 6X6 I had bought down in Oregon. Coming back we went through "Glacier Lake" area to avoid traffic. Coming down off the plateau we lost the brakes in the dually and had to use the escape ramp which was thankfully there ! My friend was driving at the time and all I could do was hang on and pray we didn't end up going down the side of the mountain. Needless to say we all had the shakes after stopping !
This was my first deuce so I wasn't aware of how heavy they where. Also I was only 26 (still immortal) , a silly young kid who never thought about dying until then !
Last edited: