- 3,799
- 5,842
- 113
- Location
- MA
No ingress there... just for air ducting. Bastard would need to have drill bits for teeth to get into the machine from there.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MEP-803a "click" no start
- Thread starter emndive
- Start date
- 2,126
- 3,492
- 113
- Location
- Pepperell, Massachusetts
Not needed there. They can't get thru there.
- 16,668
- 23,815
- 113
- Location
- Burgkunstadt, Germany
Not needed.
- 16,668
- 23,815
- 113
- Location
- Burgkunstadt, Germany
Have you noticed. Great minds think alike!
Can more mufflers be added to exhaust?
- 3,799
- 5,842
- 113
- Location
- MA
They are not designed for any additional backpressure which would come from such an addition... I would not do it. These are very quiet sets... not hospital grade quiet, but damn quiet to me. Do you find yours is loud??
Yes!!!
- 16,668
- 23,815
- 113
- Location
- Burgkunstadt, Germany
If you want loud. Stand next to a 150 KW turbine gen set.
No, just curious . my gen is under a roof need to run it up should I use larger dia pipe?
No thank you
- 3,799
- 5,842
- 113
- Location
- MA
Thats your call... set was designed for the pipe size as is. Larger shouldnt be a penalty (typically isnt on diesel systems as they do not want backpressure). I would just make sure you do not have needless angles or bends in the exit pipe.
Also if you run additional piping, you will want a flexible section of pipe somewhere in line to basically dissipate any excess NVH (noise, vibration, harshness).
ust me
The roof is 8-10 feet above gen no walls no problems . I could a run a 6 inch flexable line. I'm just looking for something to do BORED IN JAMUL
whitch TM has wiring diagrams ?
- 2,126
- 3,492
- 113
- Location
- Pepperell, Massachusetts
The -24 TM
- 16,668
- 23,815
- 113
- Location
- Burgkunstadt, Germany
Why are you ordering anything? The TM's are here in the forum for free. You do know that?
- 3,799
- 5,842
- 113
- Location
- MA
MEP-803A, All the TM's you need
This should be all the TM's and additional information you need to work on the MEP-803A
www.steelsoldiers.com
I can' find them
- 3,799
- 5,842
- 113
- Location
- MA
Look above, I provided the link to the technical manuals section, related specifically to your machine (MEP-803A).