- 2,677
- 8,648
- 113
- Location
- Alexandria, La
Yesterday was "remove engine" day!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Operation: Ethel. Kendelrios M37 (re)build thread
- Thread starter kendelrio
- Start date
- 2,677
- 8,648
- 113
- Location
- Alexandria, La
I know I seem all over the place on the order of repair, but as I'm a one, sometimes two man operation, I'll work on something til I get stuck or frustrated and work on something else to still move forward.
- 2,677
- 8,648
- 113
- Location
- Alexandria, La
Oh, and once I pulled the winch shaft and unlocked it, she spun freely, so that's a plus!
- 3,800
- 2,828
- 113
- Location
- Peoria, Illinois
It's the "propeller" in the front.....attitude looks good for take-off. LOL....
Eating an elephant.......one bite at a time
Eating an elephant.......one bite at a time
- 1,715
- 3,845
- 113
- Location
- Hidden Valley, Az
Ditch the ugly angle-irons atop the winch.
Cut a piece of 3/16 Alum diamond plate to just fit on top of the winch.
Paint, drill, & bolt on.
Does the strength needs, and gives you a place to stand when checking yer oil.
Cut a piece of 3/16 Alum diamond plate to just fit on top of the winch.
Paint, drill, & bolt on.
Does the strength needs, and gives you a place to stand when checking yer oil.
- 2,677
- 8,648
- 113
- Location
- Alexandria, La
I like that! Right now the angle iron is a good nut/bolt/tool tray!
- 1,190
- 446
- 83
- Location
- Lockport N.Y.
Yup , I did the same thing with my winch , for exactly the same reason .
- 2,677
- 8,648
- 113
- Location
- Alexandria, La
Couple of things done the last few days.
The boys wanted to help, so they got busy pressure washing and wire wheeling:
I got busy priming and rhino-lining
The tool tunnel:
The fuel can holder
And the spare tire carrier. (Its the OG bed spare carrier, not the "new" (and inferior
) door spare holder:
And I'm happy to say I'm moving into a bigger shop on news we are getting another "baby". (I'll post about that recovery probably Sunday. It's an awesome surprise!)
The boys wanted to help, so they got busy pressure washing and wire wheeling:
I got busy priming and rhino-lining
The tool tunnel:
The fuel can holder
And the spare tire carrier. (Its the OG bed spare carrier, not the "new" (and inferior
) door spare holder:And I'm happy to say I'm moving into a bigger shop on news we are getting another "baby". (I'll post about that recovery probably Sunday. It's an awesome surprise!)
- 3,800
- 2,828
- 113
- Location
- Peoria, Illinois
ANOTHER
ONE???? Oh my, hope you don't need assistance......................They do say, "the green iron disease".........................=)Couple of things done the last few days.
The boys wanted to help, so they got busy pressure washing and wire wheeling:
View attachment 886776
View attachment 886777
View attachment 886778
View attachment 886779
View attachment 886780
I got busy priming and rhino-lining
The tool tunnel:
View attachment 886781
The fuel can holder
View attachment 886784
And the spare tire carrier. (Its the OG bed spare carrier, not the "new" (and inferior
View attachment 886783
And I'm happy to say I'm moving into a bigger shop on news we are getting another "baby". (I'll post about that recovery probably Sunday. It's an awesome surprise!)
View attachment 886785
- 16,765
- 24,068
- 113
- Location
- Burgkunstadt, Germany
I know! I know!!!!!!! nah, nah!
- 2,677
- 8,648
- 113
- Location
- Alexandria, La
Also got the first piece of shop wall art donated today!
- 3,800
- 2,828
- 113
- Location
- Peoria, Illinois
- 16,765
- 24,068
- 113
- Location
- Burgkunstadt, Germany
A shop aint a shop, without a naked lady calendar!
- 3,800
- 2,828
- 113
- Location
- Peoria, Illinois
I'll tell our wives.......oh boy, this'll be fun
- 1,715
- 3,845
- 113
- Location
- Hidden Valley, Az
A bed mounted spare sux.
You'll only have a flat when it is full of firewood or some such.
The door rack is really cool, and I can show you how to make it work easily.
Besides, it will deter any road rage idiots from reaching over it. Just open the door and push...
You'll only have a flat when it is full of firewood or some such.
The door rack is really cool, and I can show you how to make it work easily.
Besides, it will deter any road rage idiots from reaching over it. Just open the door and push...
John Mc
Well-known member
- 218
- 303
- 63
- Location
- Monkton, VT
Tire on the driver's door just seems like a pain in butt to me. I use the door at least twice every time I use the truck. I can deal with getting the spare out of the back on the rare occasion I'll need it.
- 16,765
- 24,068
- 113
- Location
- Burgkunstadt, Germany
Spare on the door is all I ever knew. When I got to my first unit, we still had about 4-5 trucks. They all had door spares. I kinda liked them. We drove the last 4-5 M37's to the Böblingen DRMO, in 1973. A half hour after we hit the road, our "Convoy", and that's stretching the word convoy, broke up, and it was every man for himself. I ran out of gas, and bummed some from a Kasserne someplace that I have no idea where it was. Too many bowls. Then my truck would no longer allow me to push the clutch in. The linkage bolt and nut fell out. Again, too many bowls. So I took my sleeping bag and passed out on top of the canvas roof. At zero dark thirty, I heard some sounds, sat up and loudly said, "Morning! Only to look down at a MP with his pistol pointed at me. After we both calmed down, he helped me use some wire to fix the clutch, and I made it to Böblingen. I was not the last one to show up. Everyone broke down or ran out of fuel. But that was some road trip. Ken, you are so lucky to have such a truck!
- 1,715
- 3,845
- 113
- Location
- Hidden Valley, Az
I'll have to take some pix and post them here. Once the simple mod is done, it is really easy to get in & out.
DG
DG
- 2,677
- 8,648
- 113
- Location
- Alexandria, La
Pulled the bell housing and transmission today and pressure washed the engine to prep for cleanup/paint. Found a rotted out freeze plug, so that's next on the hit list!
Also uncovered her cast marks on the block and found a data plate!
And on a side note:
I am **so** glad I wasn't able to fire her up when I tried initially. Had I done so, I would not have found these issues that would surely have jumped up and bit me in the butt later! While she's a bigger task than I originally bargained for, I am thoroughly enjoying every minute working on her.
The lesson here I guess is to never just assume your truck is good to go; especially the older ones. I am so glad she will be thoroughly gone through and 100% when I get her done!
Also uncovered her cast marks on the block and found a data plate!
And on a side note:
I am **so** glad I wasn't able to fire her up when I tried initially. Had I done so, I would not have found these issues that would surely have jumped up and bit me in the butt later! While she's a bigger task than I originally bargained for, I am thoroughly enjoying every minute working on her.
The lesson here I guess is to never just assume your truck is good to go; especially the older ones. I am so glad she will be thoroughly gone through and 100% when I get her done!
- 5,614
- 2,922
- 113
- Location
- Metairie/La (N'awlins)
If one freeze plug is rotten then its friends also need to go.....