• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Operation: Ethel. Kendelrios M37 (re)build thread

rtk

Well-known member
Steel Soldiers Supporter
1,190
446
83
Location
Lockport N.Y.
Ditch the ugly angle-irons atop the winch.

Cut a piece of 3/16 Alum diamond plate to just fit on top of the winch.

Paint, drill, & bolt on.

Does the strength needs, and gives you a place to stand when checking yer oil.
Yup , I did the same thing with my winch , for exactly the same reason .
 

kendelrio

Well-known member
Steel Soldiers Supporter
2,682
8,674
113
Location
Alexandria, La
Couple of things done the last few days.

The boys wanted to help, so they got busy pressure washing and wire wheeling:

20221220_130853.jpg

20221220_154342.jpg

20221220_152642.jpg


20221220_123109.jpg

20221220_124824.jpg

I got busy priming and rhino-lining

The tool tunnel:

20221220_165120.jpg

The fuel can holder

20221222_101216.jpg


And the spare tire carrier. (Its the OG bed spare carrier, not the "new" (and inferior 😁😄😆) door spare holder:

20221222_101156.jpg

And I'm happy to say I'm moving into a bigger shop on news we are getting another "baby". (I'll post about that recovery probably Sunday. It's an awesome surprise!)

20221222_095054.jpg
 

marchplumber

Well-known member
Steel Soldiers Supporter
3,835
2,930
113
Location
Peoria, Illinois
ANOTHER
Couple of things done the last few days.

The boys wanted to help, so they got busy pressure washing and wire wheeling:

View attachment 886776

View attachment 886777

View attachment 886778


View attachment 886779

View attachment 886780

I got busy priming and rhino-lining

The tool tunnel:

View attachment 886781

The fuel can holder

View attachment 886784


And the spare tire carrier. (Its the OG bed spare carrier, not the "new" (and inferior 😁😄😆) door spare holder:

View attachment 886783

And I'm happy to say I'm moving into a bigger shop on news we are getting another "baby". (I'll post about that recovery probably Sunday. It's an awesome surprise!)

View attachment 886785
ONE???? Oh my, hope you don't need assistance......................They do say, "the green iron disease".........................=)
 

Guyfang

Moderator
Staff member
Moderator
16,920
24,535
113
Location
Burgkunstadt, Germany
Spare on the door is all I ever knew. When I got to my first unit, we still had about 4-5 trucks. They all had door spares. I kinda liked them. We drove the last 4-5 M37's to the Böblingen DRMO, in 1973. A half hour after we hit the road, our "Convoy", and that's stretching the word convoy, broke up, and it was every man for himself. I ran out of gas, and bummed some from a Kasserne someplace that I have no idea where it was. Too many bowls. Then my truck would no longer allow me to push the clutch in. The linkage bolt and nut fell out. Again, too many bowls. So I took my sleeping bag and passed out on top of the canvas roof. At zero dark thirty, I heard some sounds, sat up and loudly said, "Morning! Only to look down at a MP with his pistol pointed at me. After we both calmed down, he helped me use some wire to fix the clutch, and I made it to Böblingen. I was not the last one to show up. Everyone broke down or ran out of fuel. But that was some road trip. Ken, you are so lucky to have such a truck!
 

kendelrio

Well-known member
Steel Soldiers Supporter
2,682
8,674
113
Location
Alexandria, La
Pulled the bell housing and transmission today and pressure washed the engine to prep for cleanup/paint. Found a rotted out freeze plug, so that's next on the hit list!

20221229_165029.jpg

20221229_165022.jpg

Also uncovered her cast marks on the block and found a data plate!

20221229_164920.jpg

20221229_164911.jpg


And on a side note:

I am **so** glad I wasn't able to fire her up when I tried initially. Had I done so, I would not have found these issues that would surely have jumped up and bit me in the butt later! While she's a bigger task than I originally bargained for, I am thoroughly enjoying every minute working on her.

The lesson here I guess is to never just assume your truck is good to go; especially the older ones. I am so glad she will be thoroughly gone through and 100% when I get her done!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks