• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What have you done to your HMMWV today/lately

TOBASH

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
Supporting Vendor
3,596
3,518
113
Location
Brooklyn, NY
BLK HMMWV said:
How the hell is he supposed to know that??
He has one side bolted on and you want him to what , let someone crash into the side of him?
Seriously Tobash sometimes I wonder about you.
Click to expand...
He is posting about the units and might know more that he just posted.

He seems to know a bit about the vendor.

He could always field test his vehicle for me.

You’re too dark BlkHMMWV. Time to paint your truck another shade like white, and lighten up.

🤣
 
Inspector 1

Inspector 1

Active member
105
73
28
Location
Spring Texas
TOBASH said:
He is posting about the units and might know more that he just posted.

He seems to know a bit about the vendor.

He could always field test his vehicle for me.

You’re too dark BlkHMMWV. Time to paint your truck another shade like white, and lighten up.

🤣
Click to expand...
I appreciate your question although the rock rails were purchased mainly for the removable step so my wife can get in a bit easier. I actually am in the process of ordering the pictured grab bar rails to mount on the hard top roof. She or I should have no problem getting in once everything is installed. To actually answer your question the rails are not welded two piece angle iron. They are laser cut one piece GRADE 50 HOT ROLLED, PICKLED and OILED (HRPO) CARBON STEEL. I imagine that they will pretty much take whatever abuse that you throw at them. I do a lot of parades in my HMMWV. I like knowing that my HMMWV is certainly capable of "extreme" driving although I typically do not drive it that way.
 

Attachments

twisted60

twisted60

Well-known member
617
250
63
Location
Jupiter, Florida
Dock Rocker said:
I got all those dang radiator hoses changed and a new heater control valve installed. Next on the list is the belts. I a trying to recruit an anorexic midget to assist with the removal of the line going to the fan motor.
Click to expand...
I just did the same thing recently, Ya the fan hose is a tight squeeze, fortunately I can slip an arm in just enough to get to it. So I feel your pain.
 
Bulldogger

Bulldogger

Well-known member
Steel Soldiers Supporter
1,331
594
113
Location
Quantico VA
For those considering Centramatics, I decided to make the plunge today and did some price searching. Found the next best price (by $1) on HitchSource.com, and they offer a price match, so I asked them about it and instead of the $1.10 difference (delta plus 10%) they gave me a 5% off code. Shipping over $99 is free too. Anyone interested in jumping on it can use the code HITCH5. Put a set of 4 for me at just under $250. I searched the usual coupon sites and did not turn up this code, by the way. (Oh and if anyone wonders why Centramatic make both a light truck and H1 balancer with the same lug pattern, but charge a lot more for the H1, I emailed them and they note that the H1 is heavier construction and has much more active weight balancing material in it.)

https://www.hitchsource.com/

Bulldogger
 
C

Coug

Well-known member
Steel Soldiers Supporter
3,003
4,420
113
Location
Olympia/WA
44ed97698ca293bef7fc16f77cb15b68af5f8460-1-1.jpg
I recently acquired a truckload of random DRASH stuff, and found a couple vehicle boots in the pile, so I tried one out with the BEOD and it fits just fine.
Now just need to set up a tent for it to connect to.
 
FKAM

FKAM

Active member
138
64
28
Location
Duchesne, Utah
abfisher1798 said:
Today I installed a long awaited tailgate only to discover it was all for nothing since it will not fully open when paired with the rhino spare tire carrier. (Sigh)
Click to expand...
That doesn't sound good. Post a picture of how it interferes. I haven't seen a Rhino spare tire carrier that doesn't allow the tailgate to open fully
 
BLK HMMWV

BLK HMMWV

Well-known member
1,588
513
113
Location
Pasadena California
you have installed something wrong. or you need to lift the lock mechanism up on your Rhino to allow it to swing past 90 degree's.
It will lock at the 90 degree point this may be what your experiencing
 
C

Coug

Well-known member
Steel Soldiers Supporter
3,003
4,420
113
Location
Olympia/WA
beach run today. a couple 5 tons, a medium equipment transport, an M715, a couple LMTVs, and 3 HMMWVs.
It was commented that the HMMWVs were like the little kids of the group, playing around pretty much everywhere on the beach, driving over logs and hills, and just generally having fun.

135206990_2724496404470257_5631019270948710853_n.jpg135188036_2724496184470279_1134370311961699300_n.jpg
 

Attachments

A

abfisher1798

Active member
189
87
28
Location
Blythe, California
BLK HMMWV said:
you have installed something wrong. or you need to lift the lock mechanism up on your Rhino to allow it to swing past 90 degree's.
It will lock at the 90 degree point this may be what your experiencing
Click to expand...
Today I learned that by holding the locking mechanism up, the rhino carrier will swing past 90 degrees and allow the tailgate to fully open!

Glad I checked here. Thanks, guys!
 
You must log in or register to reply here.
111,221members
165,494threads
2,329,021posts
1,470online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks