What have you done to your HMMWV today/lately

[juanprado]

Painted, Still need pin for handle. Next will be the spare.

Easy to find. You can use the square or half moon lock pins. Home depot, Lowes, tractor Supply. OE also uses a metal wire rope crimped on both ends on to the pin assembly so it does not get misplaced. Also easy to make with stuff from Home Depot or lowes.

I also had another pin at the ratchet handle hole wire roped as a spare.

I don't remember the sizes off hand but it this style set up:

https://www.lowes.com/pd/Hillman-2-5-in-Square-Wire-Lock-Pin/3024937?cm_mmc=shp-_-c-_-prd-_-hdw-_-ggl-_-LIA_HDW_126_Fastening-_-3024937-_-local-_-0-_-0&ds_rl=1286981&gclid=CjwKCAjw4ayUBhA4EiwATWyBruG7iPh65ZCQPwAlfgPYQdV_CCNxZxvH7h8_iA8X3we5Dv0YUF-7FRoCBfAQAvD_BwE&gclsrc=aw.ds

 

[Glider]

Thank you!

 

[Action]

Did a few pics with a friend’s truck...

 

[TOBASH]

What, too afraid Action to use the Airlift system?

(Awesome pics!!!!!)

 

[Mullaney]

What, too afraid Action to use the Airlift system?

(Awesome pics!!!!!)

.
I dunno...
Don't think I have seen a cobra with something on a sling below it.
I can just imagine it huffing and puffing and going nowhere fast.

 

[Action]

What, too afraid Action to use the Airlift system?

(Awesome pics!!!!!)

At least they stopped by to say HI.

 

[Gamble]

Did a few pics with a friend’s truck...
View attachment 868443

Amazing!!! Those are incredible pictures. Let me know if your friend can get anymore of those doors.

 

[HUNvee]

Besides humvee, the cobra is my other big love! Both in one picture ...
I already have a humvee!

 

[Glider]

This Is Jerry rig everything. Good watch. Could be used as a rear differential instructional video.

 

[rcamacho]

Watched that video as well this morning. Expensive mistake but great production value.

 

[Gcelevator]

Installed a top today from Blue Ox Tops AkA William Welsh. Amazing and clean work, fits like a glove.
Also installed the driver's side fire extinguisher

 

[rcamacho]

Adjusted cooling stack positioning per TM to resolve an interference issue with the fan. Had to remove the side panels to fully access the two rear upper radiator struts. Fairly easy after removing the panels.

Sent from my iPhone using Tapatalk

 

[Action]

Adjusted cooling stack positioning per TM to resolve an interference issue with the fan. Had to remove the side panels to fully access the two rear upper radiator struts. Fairly easy after removing the panels.

Sent from my iPhone using Tapatalk

I cant tell from your pic, but do you have the bracket on top that holds the fan shroud off of the fan?
The shroud also has slotted holes, so it can be moved up and down on the radiator.

 

[Sigi]

Pulled the installed Red Dot A/C components and hoses. Capped and left compressor on engine for now.

Started installing Plan B hard top and back curtain. All aluminum parts are CNC cut and fit well. Some easy riveting and rivet nut installation required. Very complete kit; Plan B even included a pneumatic rivet gun and the rivet nut arbors.

 

[Maxjeep1]

Pulled the installed Red Dot A/C components and hoses. Capped and left compressor on engine for now.

Started installing Plan B hard top and back curtain. All aluminum parts are CNC cut and fit well. Some easy riveting and rivet nut installation required. Very complete kit; Plan B even included a pneumatic rivet gun and the rivet nut arbors.

Did you have to cut your b-pillar off a little bit?

 

[Sigi]

Did you have to cut your b-pillar off a little bit?

No, I did not have to touch the B-pillar. I had to loosen the passenger side of the A-pillar hinge a bit to square it with the roof.

 

[Maxjeep1]

No, I did not have to touch the B-pillar. I had to loosen the passenger side of the A-pillar hinge a bit to square it with the roof.

Really nice!

 

[TOBASH]

Pulled the installed Red Dot A/C components and hoses. Capped and left compressor on engine for now.

Started installing Plan B hard top and back curtain. All aluminum parts are CNC cut and fit well. Some easy riveting and rivet nut installation required. Very complete kit; Plan B even included a pneumatic rivet gun and the rivet nut arbors.

I don't understand people who remove A/C, BUT that compressor is used by many offroad drivers to air up tires. just add fittings for air filtration and appropriate hoses.

 

[rcamacho]

Pulled codes on 4L80E: Code 71 for RPM sensor.
Tested sensor per TM. Bad, full open circuit. Replacement in the mail….


Sent from my iPhone using Tapatalk

 

[HoveringHMMWV]

Although cosmetic in nature, I started adding 3/8" socket button head screws w/ washers to fill in the holes left by the demil process. I also included rubber washers under each backside steel washer to hopefully make them water/moisture proof. I started the process by priming and painting all of the individual components. I chose the 3/8" size because they would fit under the door hinges without impeding their function.