Bravo2Uniform
Member
- 253
- 21
- 18
- Location
- McMinnville, TN
Thank you! I am on a steep learning curve, this is the first restoration I've done. I appreciate the vote of confidence!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your JEEP today
- Thread starter zout
- Start date
Another Ahab
Well-known member
- 17,996
- 4,549
- 113
- Location
- Alexandria, VA
Hoefler
Active member
- 1,096
- 20
- 38
- Location
- White Bear Lake,MN
Replaced transmission, put engine back in (only to discover it has stuck rings), new springs, sand blasted and painted frame and body. Put in one new seat and got it running. Was ARMY jeep-no rust. Had firefighting stuff on it when I got it from Sparta. Body is clean but banged up.
Pete
Bravo2Uniform
Member
- 253
- 21
- 18
- Location
- McMinnville, TN
Today I Found This On My M38A1
Hidden under four coats of paint - the serial number. Did not expect to find it. Also Learned this is a replacement hood - there is another serial number below this one.
Hidden under four coats of paint - the serial number. Did not expect to find it. Also Learned this is a replacement hood - there is another serial number below this one.
- 623
- 53
- 28
- Location
- Attleboro, MA
Took her through her first mud hole!
Another Ahab
Well-known member
- 17,996
- 4,549
- 113
- Location
- Alexandria, VA
Saberr
Active member
- 185
- 84
- 28
- Location
- Temecula,Ca
Now that looks great. That dirt just add and now screams jeep, not trailer queen 
.
.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Looks like you had fun.
- 623
- 53
- 28
- Location
- Attleboro, MA
It was a nice long Club ride and just a tad of MUD if you wanted to, yes it was fun, but the cleaning is never fun. Two full washes and it's still dirty! So much for the shine! 
Our goal was never a trailer queen, we want that right out of the Motor Pool look! Nothing like a JEEP!
Our goal was never a trailer queen, we want that right out of the Motor Pool look! Nothing like a JEEP!
Bravo2Uniform
Member
- 253
- 21
- 18
- Location
- McMinnville, TN
Painted a Test Patch
Couldn't wait, wanted to see how the paint color looked. From the patches showing through, there's still a lot more sanding to be done. Still, it's motivational to see what it will look like.
Couldn't wait, wanted to see how the paint color looked. From the patches showing through, there's still a lot more sanding to be done. Still, it's motivational to see what it will look like.
Another Ahab
Well-known member
- 17,996
- 4,549
- 113
- Location
- Alexandria, VA
I meant to tell you, Hoefler; that's an excellent looking paint job.
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]"){kind=icon}
Bravo2Uniform
Member
- 253
- 21
- 18
- Location
- McMinnville, TN
Fiberglass bondo today...apply, wait, sand, itch, repeat.
Saberr
Active member
- 185
- 84
- 28
- Location
- Temecula,Ca
Got my transmission and transfer painted and installed, i have almost mostly rebuilt my whole wire harness. Got half my clutch done, waiting for other parts, go figure, parts were going to use are too warn.
- 623
- 53
- 28
- Location
- Attleboro, MA
Changed
the distributor system to the waterproof version and installed the correct air cleaner!
Before
After
the distributor system to the waterproof version and installed the correct air cleaner!
Before After
Another Ahab
Well-known member
- 17,996
- 4,549
- 113
- Location
- Alexandria, VA
TGP (IL)
Active member
- 512
- 35
- 28
- Location
- Metro East IL
That's on my to do list.
Previous owner(FD) changed to 12V and Civi Dist.
I have gathered the parts just need to get too it.
Tom
- 623
- 53
- 28
- Location
- Attleboro, MA
Thats what we said. We finally got to it!
Bravo2Uniform
Member
- 253
- 21
- 18
- Location
- McMinnville, TN
Mine, too. I have converted back to 24V, it was EXPENSIVE!!
Bravo2Uniform
Member
- 253
- 21
- 18
- Location
- McMinnville, TN
Out of primer
Started with the primer today. My first time painting a vehicle, first time with a sprayer, first time with filler primer...lots of firsts. Going to have to sand the primer considerably in several places where I didn't have the sprayer adjusted properly; used two quarts of filler primer in about 5 minutes. Way too heavy a coat and that stuff is apparently made by Bavarian gnomes out of children's tears and eagle feathers - it is tres expensive. However, I am a lot more knowledgeable today than yesterday, so it is all good.
Started with the primer today. My first time painting a vehicle, first time with a sprayer, first time with filler primer...lots of firsts. Going to have to sand the primer considerably in several places where I didn't have the sprayer adjusted properly; used two quarts of filler primer in about 5 minutes. Way too heavy a coat and that stuff is apparently made by Bavarian gnomes out of children's tears and eagle feathers - it is tres expensive. However, I am a lot more knowledgeable today than yesterday, so it is all good.
Another Ahab
Well-known member
- 17,996
- 4,549
- 113
- Location
- Alexandria, VA
Good thing you didn't buy the Bavarian Gnome premium primer:
- That stuff is made out of children's feathers and eagle tears and is even MORE expensive.
