Search results

This doesn’t really make sense. These are two separate systems, and was all normal for a year until now. Was the truck recently submerged? Do you frequently use the winch or dump? Is the winch leaking all the time or just when the pto’s engaged, and is it pouring out, or just leaving spots while...

Welcome for Southeast Indiana! I have a sister that lives in Port A, we will be out for a visit in less than a month.

What pressure did you have to turn the governor up to? If your inflating to 70psi you should already have the updated ECM, now all you need is the 90psi wrecker transducer, and maybe the wheel valve upgrade depending on how they act. All of my old style wheel valves hold all the way up to...

Not familiar with the deuce canisters, just farm and heavy equipment. Are they caped on the end like some, is it possible to instal them upside down? Just a though, but I dont think you could get the housing back together on the closed end ones I’m thinking of upside down though.

I would have it hauled in unless you have a lot of extra time. If you do, I would go with more hoist than the 5x20 or I think you will be disappointed. I want more and mine has dual 5x20 cylinders, and will only dump 11 to 13 ton at 2500psi, depending on how the load is positioned. The truck...

I have a bunch of better ones, but unfortunately have been getting this message for the last week or so, ever since Tapatalk made some changes. I also noticed those couple I could download have been seriously reduced in quality.

The 5 ton is a beast. Drug the 50,000lb Cat, up out of the mud hole quite a few times this week! Even with a dead anchor of a jumped track.

I have all the same problems off-road, and do the same with low range an such. But I want to do my mods in a logical order and see the results with real data for comparison. Yes, I can top 1300 with a good load, on big hills. I still need to change my alarm temp from 1100 to around 1275.This...

New batteries and disconnect switch. Forklifts are a wonderful thing!

He’s only getting something like 1900 rpm at WOT, plus I believe he’s wanting to go above 2100 to compensate for dropping down to 395’s, will the aneroid and fuel screw adjustments increase the rpm?

This is the EGT gauge I went with, comes with K probe that has a straight metric thread. Not the purest looking, but I liked the programable high end alert, as well as external output for a light or buzzer, that I haven’t got around to installing yet. I just went with a cheapo boost gauge. I...

There’s “The American Watchmakers-Clockmakers Institute” right over in Harrison, OH I alway’s wondered about that place, maybe they would fix it in class?

Biggest thing is to get the pyro installed first. Can’t undo a roached engine, and not many of us have the super trucker EGT ESP... Toby your M929 is the exception, until we get it consistently pulling to 2100rpm I wouldn’t consider it moding or turning up. I need to get gov springs installed...

Have you checked you fuel pressure, or installed a “new” overflow valve with your IP change? Dont think it’s a transmission problem causing starting or low power issues...

The pump numbers are likely on the pump itself. If you pull the plastic tank off you should see them.

Use your CTIS in those situations, dump the tires down to emergency pressure, and you wont likely get stuck or tear the yard up as bad

Sad to hear. I wonder if all of our Hollywood celeb’s, and like have finally moved to Canada like they keep promising, and jacked up your government ad well??? Pretty soon we are all going to be riding in a hand basket...

I like it! 65,000lb of frame twisting power on the 925. I might need it soon, if this mud gets any deeper...

You should be able to run 68 at just over 2100 rpm stock. IH ran these motors at around 2800 in there combines originally, but ended up backing them off to something like 2500 rpm, iirc, marine versions likely up there as well? Also, you shouldn’t lug down to 1500 rpm, it’ll send your EGT’s...

Bumping this up, as the title works for my question. I believe the MTVR’s run 16.00 tires, the question is how wide are the wheels... 10”?