Search results

any local auto parts stores? The main lines from the hard line to the metering pumps is 1/4" Gates... I find it locally on a roll at o reillys. You just cut the metal flared fitting off the hard line, and get it off the metering pump inlet. Replace with new Gates lines and small hose clamps on...

All of the stores within 75 miles of me are completely out of stock on this mat... hopefully its not true of other locations. Needed some for actual stall use...

The Rock Auto link is dead again, must have sold out.

Happy to help, karma is good like that.

Good find... they were out of stock the last few times I looked.

The right tool makes a world of difference.

make sure you have the chain wrench as high up as you can muster, just below the mounting lip. The base is stronger than you know... just have to get that thing moving then its gravy.

Yes it will

I think you would find that where 10kw was needed, they used the MEP-903A instead (10kw enclosureless APU).

Save yourself mucho aggrevation and bloodied knuckles... get a good oil filter chain wrench, and take the side top panel off the machine next to this separator. You can access the mounting base from the side and put your whole weight into it this way. Grab as high up on the filter as you can...

The heat will be a concern as you note, maybe you can find rectangular HVAC ducting that you can adapt to the machine, and exit via plenum in your wall (you could open a cover to it only when in use, secure otherwise closed). As for the routing... (2) 45* bends are much preferred over a single...

I just had to replace one a few weeks ago, so I had the link handy. I've even seen these things fail under the vibration of running... the red stop slides itself closed under load. But sometimes its just an internal failure, either way... cheap and quick enough fix.

From your description, this is what I thought you were going to find. Here is the replacement: https://www.alliedelec.com/product/idec-corporation/ayw401-r/70172557/

Amazon has some back in stock (the liars said one in stock, I bought it... suddenly 10 more appeared available). But anyone whose been waiting for some to show back up, here you go: https://www.amazon.com/gp/product/B0027ICAME/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Welcome to SS. Try this on for size: https://www.ebay.com/itm/ME-804B-Voltage-regulator-new-in-open-box-/293461762342

Even if they dont take the same care you would, the crossway ribs in the genset base are very durable. Will take a lot of screwed up force to damage it. More important to watch the body sheet metal

Every yard is different. You CAN slide forks under an 802/803 from either end, just much room for clearance (but its totally possible). Just have the loader take their time, and you should be fine.

It is listed as an equivalent to the Woodward SA-3865, so theoretically its a drop in replacement.

Tried to find contact info on that website, and no dice. Through some whois searching its a direct from China website. Not sure I will be giving them business. If I can find the same thing in domestic stock, I might pop though. The end looks threaded so its probably a damn carbon copy of the...

Yeah I saw the $200 ones (and GMG isnt far behind at like $228), but these aren't complex devices. I don't have an active need, but just looking to have a couple on the shelf if needed.