Search results

When you decide to paint, let me know. I would assume you will attempt to use CARC. We can do a two for one paint day.

(I am not associated with the sale, just posting to admire the effort of the builder) 3/4 Scale WW II Tiger Tank:eBay Motors (item 280431269842 end time Dec-06-09 16:27:30 PST)

I was reading in the TM's that you could change the colors on you basic 3 color CARC woodland pattern to better match the area you are in.

The next time I have my dash off I will look to see if my GEN2 lead is burnt also... Good Find! Also, If I might suggest, ditch the starter relay under the dash and wire in a 60amp push button starter switch. I installed mine up by the volt meter at first, but then I installed a temp gauge...

$20 console off of craigslist and a heavy duty bracket...

I wish you luck dude... I will add that my GEN2 light has NEVER come one even after bulb replacement and cleaning the contacts... I would suggest changing the charging relays for GEN1 and GEN2. These are located under the dash next to the starter relay. Pull one out and take it with you to...

When the motor is cold, the truck does a "afterglow" cycle on the glow plugs until things warm up a bit. It sounds like a solenoid click ~ 5 to 7 seconds ~ click again, correct? Then it repeats in 15 - 20 seconds...

Congrats on the truck!!

I will add a few that I took also... It was a great time...

Those were a STEAL for you guys with trucks that can pull it...

Yep... get the ST-85 and be done with it forever...

Went for 400mile round trip the other weekend and got 19.3 at 65/70mph and on the way back, I got 21.1 mpg at 60mph. M1009 stock setup

I was more talking about the wheel itself. If these will fit, then a 16inch wheel will also. I'm a cheap ass and I can find used 16inch tires easier than 15 inch tires... I just have to be sure to check the backspacing.

Use a ST-85 - direct bolt up replacement and it has a great reputation for being a solid component...

PM sent

4 Rims 6 on 5.5 15 x 6 Does the wheel HAVE to ride on the hub?

I called a local source and he says he has them, it was just too wet to go digging for them today... Hopefully she will be 100% by tomorrow.

I should be if I can find the parts... Can anyone cross reference the GM part numbers? These are the ones listed in the TM's Bolt, self locking 1635490 Bolt, machine 14067717 Spacer, sleeve 14067725 Thanks

On the way back from the coast today, Maggie gave me a scare... Driving along I hear a "whap, whap, whap" then the sound of hardware hitting the blacktop. I see the rather long bolt fall out of the truck onto the ground so I walk back and get it. Turns out this bolt is the pivot bolt for the...

Any mid 80's Blazer or Suburban would work...