Search results

This is the one I got... Elite Car Covers Custom Waterproof Cover for H-1 Wagon https://www.amazon.com/dp/B00T8DOJ34/ref=cm_sw_r_cp_api_cWoxxbBHRWDC8

Finally got the brackets fabbed to mount the grab bars & running boards to the GMV. Almost ready for CARC.

Every post from Retiredwarhorses should have the disclaimer: "Don't try this at home, folks"

Very cool, Leo4x4. Did you fab the go-light bracket?

I'll be starting this install soon and will post pics to help others.

Cool, glad it helped! Let me know if you need any more details.

Look at the front skid plate. If it is longer, noted by the stretched out holes, then it's for the a2 or ECV Humvee, not the standard m998's on GP. If it's the shorter skid plate (flatter holes), it'll work on a standard Humvee. Here are the pics of the two different ones: Longer front...

Thanks, but that might be too short. I need the deck to be at least 5' by 12'

I'm looking for a small flatbed trailer for my Humvee. Ideally, it would be like the M1101 or m1102 utility trailer's subframe, but with a flatbed deck. Have you ever seen something like that?

Thanks. This was the most inexpensive, yet effective, fix I've done. Thanks to those who've gone before me to recommend it (retiredwarhorses, etc.). It'll probably save a few PCB's over the years.

I purchased the Grounding Kit from Kascar (PN 535-A1) and installed it over the weekend. I know it's cheap & easy to make one yourself, but I don't have much wiring experience and for $70 I figured I'd get it right the first time. It was a quick & easy install. Here's a write-up in case it helps...

I'm looking for some info on the development of the GMV Variant of the HMMWV for the Special Operations groups. For example, did depots start with an M998 and just add the hardtop, C-pillar and SF accessories? Or did they start with a M1025 or similar armament carrier, remove the sponsons and...

Just saw one on that auction site titled "6.5 Liter Diesel and Transmission (HMMWV)" in North Carolina. Says it's a pull from running truck.

More pictures...

Well, to make my turret leak a little less, here are my steps in applying the recommended maintenance in the above PS Magazine. I chose to use a 1/8" thick 4'x4' square of heavy duty rubber instead of an innertube. The hatch seals up nice and tight, and no water leaks in, after sealing the hatch...

Also, here's a video... https://www.youtube.com/watch?v=gowjjP9hvdc

Posting these for Lindsaym151. Thanks!

If the white smoke issue occurs with hard starting, replace your glow plugs. It's a quick, 45-minute job and fixed the problem for me. She starts right up like a brand new truck now!

Battlefield Vegas did it with a couple of the Humvees they use to pick-up customers. Great place to visit by the way...

What prevents A2 halfshafts from working on an A1 vehicle? Can they be adapted to work, as an upgrade?