Search results

Here's the pictures of the trailer sides. Still have to paint the hardware and clean everything up. The posts are red oak and the rails are 5/4x6 treated. I moved the tool box down to the tongue. Now need to fab some ramps and adapt the plug. BTW I like your splash guards. Make them yourself?

I'll take some pictures tomorrow.

Nice!!! I just finished adding side rails to mine in anticipation of putting it to work. Did you make some kind of adaptor to hook up your lights? I am starting to look for something to allow both civvie hookup and military hookup.

PM sent.

Update. Put on the new regulator and everything is good.:grin:

BTW Delk's has used one's for 100.00.

Thanks for the info and research guys. I guess I'll pony up for a new one.:roll:

Yuk... that's what I was afraid of.aua

Started my MEP-003a today for its monthly checkup and my DC voltage is all of a sudden high. Typically the meter shows high yellow zone and voltage to the batteries at around 24.5 volts. Today after running a few minutes I noticed the meter reading into the red zone and checked the voltage at...

Speddmon thanks again.

They might be a little more complicated than they appear. I tried posting the drawing but you can't open it for some reason. The rubber part is actually not concentric and is designed to rotate slightly as the load is applied before final tightening of the bolts. That is why there is a small...

Here's the actual drawing of the motor mount per the Lord engineer.

Yes, its the one that was dropped when unloading.

Lookey what I found Found these in the trailer I just brought back from Fort Jackson. Good to see that not everything gets swiped.:grin:

I tracked down the manufacturer that originally sold the rubber mounts to Cummins (Onan) yesterday and talked to one of their Engineers. The original part number was J-12021-3 but these are obsolete. Part number J-12021-4 is still available and the only difference is that the -4 is for colder...

Speddmon, its too late to check tonight but do you think Delk would have them?

Picked up a trailer mounted MEP-003a from Fort Jackson for a friend and hauled it home this past weekend. Got it running last night and everything worked great. Took it over to my bud's house so he could unload it with his tractor and that's when the shtf.:-( As he was clearing the trailer...

Here's one of my efforts.

Even if you could figure out a way to control the steering the tire scrub would eat your tires up real bad. Would not try it with my goats.

Sent PM on 9/19 regarding 24 volt voltage regulator. Haven't heard back but still need it.