Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Sure, they are listed in the classifieds.
10 x Tires and rims - Michelin 16.00R20 XZL Tires w/ Wheels & CTIS parts, 10% tread $250
8 x rims without CTIS parts and no rim bolt nuts, Titan 05-14630-00 $85
Jon
I drove to the desert again to warm up the transmission and see if dumping some Seafoam Trans tune in will help with the transmission shifting.
When I got back I thought I would check all the temps and then record them for others to check out. I am not saying these are normal but some people...
I have fixed a lot of things - too many to mention. I had plans to fix things before I left Yermo but it took so much time that we gave up. There is a thread about my trip and some of the things I did fix before leaving Yermo.
I wish I had greased the doors and checked the gasket on the...
You will need to check each of these parts because they could be for other variants of Oshkosh military trucks.
2530011745918
49207CX
COLUMN,STEERING
2530012478541
1847600
STEERING WHEEL
2530012694876
1440650
STEERING WHEEL 17.5
2530013655272
1796610
SHAFT ASSY,STEERING
2530013667245...
Micah,
Thanks for checking. I appreciate it. I will continue to do some research because it looks to me like there was a hose on my fitting and it broke off. I do not like that it is just open like that. Anyway, I will let you know what I find out.
Jon
Nomadic,
I think you are correct. I see in the C12 manual that it comes from about the same place but instead goes to a filter. My truck does not have the filter but everything else makes sense. Thanks.
I will need to research what should be at the end of this hose and if I have any hoses from...
Artisan,
I found your post very condescending. Your attitude seems to be that you are right and I am wrong even though you know nothing about me, the situation, and did not ask me any questions. I am surprised that SS allows bulling like that.
"That is an 80,000 lb rated towbar if I remember...
Success! The seat moves forward and back now and my wife is happy.
Also, thanks to Elijah95 for the tip about the seat height switch. Switching the hoses worked.
I pulled my driver's seat. I was going to replace the air switch on the seat but when I looked underneath the seat, there are just 4 nuts holding it on. Well, in my case it was 3 because one was MIA. So I pulled it to see why it would not adjust forward and back. My wife has trouble driving the...
MTVR, I have counted 37 so far. Which is strange because I watched the video from the Marines about greasing and they did not seem to find that many. I guess I should watch the video again and count this time. Ha!
Micah,
It is not from the starter. I opened the hood and removed the flaps and I was finally able to locate the fitting by accessing from the wheel well. So I took some additional photos.
It seems to be a crankcase vent. But I am worried that it just stops and does not go any where. From...
I found out what the access hatch behind the cab is for.
I was going through and greasing everything and I could not get to the output shaft that goes into the transfer case. So I noticed that there was a panel right above the shaft so I took it off. This photo is looking down from behind...
Micah,
I did a favor for you so now I am asking a favor from you. I was looking for grease zerks under my truck (found 37 so far) and I found what looks like a fitting that should have a hose on it. BUT there is no hose to hook to it. Could you please check your truck and see what hooks up to...
Micah,
Thanks for your input. I think you should post a link to your video here too. Our videos are different but both are helpful so they should both be posted where people can find them. I did put a link to your video in my description on YouTube.
Yes, I will change the fluid again. I just...
I drove my 7 Ton out to the desert to get the tranny warmed up after changing the fluid. I wanted to get the transmission above 160 so I could be sure that the fluid was travelling through the cooler.
Elijah,
I checked the Cat engine manual and it states the the engine will shut down. Now, you might be correct and perhaps the Marines disabled that feature. I don't think they did because Cat would not warranty an engine with the over heat shut down disabled and I know the government got a...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!