• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. m-35tom

    Bent drive shaft. Anybody know the RPM's?

    if they ask you that question, you are at the wrong driveshaft shop. balanced is balanced. sounds like they are just guessing at it.
  2. m-35tom

    without water kit

    it's not worth it unless you get big $$$$$ up front. no way i would go 30 inches, MAYBE 24 and then only in clean water, you will pay for it later. get a long cable. winch cables are 200 ft.
  3. m-35tom

    To Plow or not to Plow that is the question?

    i doubt you will find air lockers, they are very rare, white owl sold out years ago. you don't need to do anything to the suspension. expect the truck to completely rust out in 5 years, when they were made there was no attempt at rust proofing and there is nothing you can do about it now...
  4. m-35tom

    carc paint

    the big problem with any of the non carc paints, is that most of them are not durable, and will 'reduce' even years later. that means that paint solvent, brake clean, gum cutter,etc will remove the paint. carc is, as far as i can tell, nothing more than urathane automotive paint. if you really...
  5. m-35tom

    Air Pressure Problems

    under the cab??? there is nothing under the cab. the air pressure control is on the firewall and the pressure relief is behind the rear of the cab. how high does the pressure go before it shuts off? is your relief jusy dumping air?
  6. m-35tom

    Can the Master Cylinder handle 50psi? (And brake flush related questions)

    you should not be able to hurt anything by pushing on the pedal as hard as you can. that's what you would do in an emergency.
  7. m-35tom

    found m35a1 what am I in for

    wrong truck for you. it will never go over 50. turning up the fuel will simply kill the engine. sprag transfer case worthless. by the time you have a good truck you will have $5 or more in it.
  8. m-35tom

    Using my deuce to plow

    not enough power, too hard to steer, too easy to rust out quickly
  9. m-35tom

    triangle pieces on doors that windows slide into place with

    in that case probably easiest to just make some replacements or straighten the old ones.
  10. m-35tom

    M109A3 communications shelter price?

    condition is everything, they are getting rare, up to $5000 if like new,much less if not
  11. m-35tom

    substitute for military power steering unit

    there is no NOS power steering for the A2, just air assist, so you will have to make everything yourself. or you can buy a kit, special price for SS. lots of info on my website.
  12. m-35tom

    Are there AWD all the time deuces?

    first, you will never know the true milage or hours, gauges are swapped often by mil and others. second if it has been used to plow snow and has been driven on salted roads, expect it to be completely rusted out in 5 years. otherwise condition is everything and that could be a good price. i...
  13. m-35tom

    HanksDeuce: 8" Lift, Bobbed, External Cage, A/C and more Project!

    stock LDT setting is 9 psi @ 2500 rpm. many are set very conservativly. you should be able to get close to 14 psi @ 1200 °f and be safe, the power differance will be impressive.
  14. m-35tom

    Battery Disconnects, 12 Volt Add Ons, and Air Tank Drain Valves

    of course you have 12 volts across a 12 volt battery. just tapping into the connecter cable between your batteries will damage both batteries. one will be overcharged and one will be undercharged. you will learn this soon when you need new batteries. get a vanner equalizer and be done with it.
  15. m-35tom

    My Deuce is dead :(

    did you run it out of fuel?? that and using other than diesel is VERY hard on the HH and will wear it out in very short time. what you think you are saving on fuel, will cost you in many other ways. i have not had to replace a fuel filter in 15 years, but i use only clean fuel.
  16. m-35tom

    Hydraulic Head little part

    a good diesel pump rebuilder will have it. don't forget to replace the 'o' rings
  17. m-35tom

    For anyone wanting more speed for your deuce

    yep 8.3 will fit and you can still use the 3053
  18. m-35tom

    m35a2 fuel delivery problem?

    you will do yourself a big favor by reading the injection manual and understanding how it works. without that understanding you are just guessing, after that it is simple
  19. m-35tom

    For anyone wanting more speed for your deuce

    at the end of the day, the only real cost effective solution is the .69 OD gear set.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks