Search results

Derrick112 is parting out a couple deuces.

I found this over on smokestack.com . [ Finished modifying and installing the BMW 318i starter this afternoon. It works perfectly with only minor modifications and is much easier to modify than the Mazda 626 starter. A Lester number 17236 can only be used, as the sole difference is that the...

bump for oldflyboy

Try to keep it under 1100* F .

It a bad picture to work with .

The transmission he has has a driveshaft yoke hang off it , so that indicates it was from a full size pickup with a divorced transfer case . It is unlikely you can adapt that transmission and transfer case and if you could it won't be cheap.

I don't think so , here is a picture of a T-90 from a CJ .

Wait until you find out what the shipping and handling charges will be .

This thread has quite a few of them. Found it by searching "cucv torque specs" with google. https://www.steelsoldiers.com/showthread.php?116269-CUCV-Torque-Spec-Cheat-Sheat-M1008-M1009-M1010-M1028-M1031 Torque Specs? Flexplate/torque convertor bolt torque? 6.2 oil pan torque specs...

If it came out that easy I would be checking the hole for excessive wear.

There are probably hundreds of threads on this in the paint and bodywork forum . And you will get more different opinions than that in this thread probably. Paint and Bodywork --

Probably posting from a phone.

And the Macks with them were in a league of their own.

Picture #1 shows a blue splice and any of them will give you problems , they usually cut the wire the are spliced into and always corrode . I consider those connectors a last resort , even the ones with silicone in the are a last resort.

Since very few people use 480v on here it will more than 10 hours to get a answer , there are some generator guru's on here but they don't log on every day . If your in a big hurry you may want to contact Green Mountain Generators .

Proper operation of the switches is also covered in the -10 TM

And if you do get them to provide any information through a FOIA expect to pay dearly for it.

[/COLOR] Your expecting a lot put of a 30-50 year old truck , no matter how well the current owner has maintained it .

Have you pulled the switches to see if there are any jumper wires .

I'm pretty sure SS isn't the market for those at that price.