Search results

Black rocks that are 16x8 with 4.5" back spacing. The 1 tons are wider though. The stock m1009 15" rims are 8" wide with 4" back spacing. http://i70.photobucket.com/albums/i90/ilikebmx999/CUCV/40A2F70D-4986-42A3-8884-F52816B28D63_zpsfs1hwqfr.jpg

If I could get pictures to post on my phone I would......

I literally just got my tires mounted today. I have 315/75-16 bfg ko2's and a 2" lift (with 1 ton axles). You'll be doing a lot of cutting and with stock 3.08's the 6.2 will be struggling.

I'm in the process of putting 1 tons under mine with 4.10 gears so I'm hoping that'll really wake it up. I've had thoughts of doing a sm465 swap but I may stick with the th400 for trail use.

Started removing the front axle for its one ton swap. Hoping to get the d60 in tomorrow morning.

That's a tough one. The turbo will be cheap and easy to set up and it really wakes the 6.2 up (I'm running under 10psi). The 6.0 is nearly double the hp of the turbo 6.2 with a tune but will be more expensive and more of a headache with wiring. A cucv also loses some of its charm with a gasser...

There's a similarly priced m1028 on the Denver craigslist (search cucv) Has a Cummins swap.

The banks kit is in the front and the turbo sits much lower than the 6.5 stock setup. The 6.5 setup has the crossover in the back.

The bracket that the jerry can holder bolts to is welded into the floor.

The banks kit has a crossover pipe from the drivers side to the passenger side turbo manifold.

Yes

I thought about making a thin spacer and using two gaskets but I'm alright with where my shift points are now. The rpms are slightly higher when shifting than what's in the TM but helps on steep climbs

What rust proofing product did you use?

I'd like a 3rd light because my dirt bike on the back blocks a decent amount of the regular lights. I think I'd like mine recessed into the Fiberglass top or just at the top of the window.

Could you post some pics of how it looks?

Get a large naca duct and put it where the heater hole was and maybe make a box for the intake tube you posted?

A bike shop cannot add a new cable end to a cable as that's not common practice. There are companies that make these however http://www.amazon.com/Odyssey-Knarps-Cable-Ends-Silver/dp/B0017GM1CG

this is exactly how I have mine. I also used mag light flash light clamps to mount my plate on the fairlead but allow it to be removable.

Apparently my post disappeared? I have a kit I was going to use but I think it's missing some small bits. You can look over the TM's (there is one for the winterization kit)

Yep, I feel the same way but it is what it is. Anything newer than 1976 must have emissions testing. Only thing exempt is cars that are less than 6 years old. I moved from a state where my cucv was an antique vehicle with no emissions to here. Theres been plenty of recent debate about if...