Search results

The .50cal BMG was made as an anti-tank gun to start with. Back in the "The War to End All War's" WWI, and it is still in use to day. Got to love Ma Deuce.[thumbzup]

Check the classifis some members here have had them made to sell here. If I rember right $20-30 shipped.?.

You would have to add a foot or two to get it under the cover.

Well I WAS winning both of them untill 8:00 this morning:evil::evil: And I was winning the MKT untill 3:30 this after noon:evil::evil::evil::evil:

I think the Gillespie and Aervoe 24087 is the old color so it should be what you want.

Honing and kits are the way to go unless the cylinders are bad. I've done that in the past with no problems.

I would say that is home (unit) made and no tm for it.

I think but don't hold me to it. That the mil gas eng trun at 3600rpm's and the Diesels trun at 1800rpm's. You can't swap the gen heads between the two. Unless you use a belt drive and some pulleys to up the rpm's.

Yes some thing is missing. It should have a glade hand on both sides. And you are right about no valve on the dash,you would have too drain the air on the trailer by unhooking the air lines,if you want to set the spring bakes. All you have to do to supply air too the trailer is to hook up the...

So you are saying that you can use it as a do all primer?? Over the old paint , bare steel and rust both light & heavy? I just want to paint stuff once and have it LAST. I have toooo many projects to do, to have to do them twice. I do not like rust!! And do not want to see it again, any time...

I just found this on Rustoleums web sites FAQ about the rusty metal primer. :Can I use Rusty Metal Primer on clean metal? A:No. The fish oil that is in the primer needs to penetrate into rust to seal out air and moisture. If there is no rust, the oil will rise to the surface making adhesion of...

You need to get the same size cleco as the hole for the rivet. A 1/8" cleco will not hold in a 3/16" hole. So if you get some make shure you get the right ones. Or some of each. They also make some clamp type.

I just open up a South Korea wheel cyc it has the bad springs in it,see pic's. I don't think it's a new star though. All the new star stuff I have gotten have labels with the dealers name. This wheel cyc has a label with a NSN and bar code. I have 10-15 new star kits from a few years back and...

They are set up on the trailers that way so you have 5kw all the time. If one needs worked on you flip the swtich and the other one takes over. Not 5kw or 10kw. As far as running 2 parallel my understanding is that it is hard to syc them together. Each needs to be running at the same cycles. But...

Try the Yard Store they are alot cheaper. www.yardstore.com And they have alot more size and types to choose from.

I'd take the M220 and the shafts but I have no $$:cry::cry::cry::cry:

Unless you pump the brakes the M/C only moves so much fuild at a time. It's not the reservoir, it's the bore of the M/C.

Use clecos too hold the sheet metal tight against the rails and rivet the track on both sides of the clecos.

Whats you going to do with the old tire's & wheel's??;-):p;-)

I don't think I have ever seen a thread about rules befor. :roll: :roll: :deadhorse::deadhorse::deadhorse: