Search results

Hey Joe! Glad to hear you are putting the miles on her! Scott's truck will be leaving our place soon. I'll be sad to see it go as it's a REALLY sharp truck. Andy

pictures here are some pics

This morning I had an M816 on a stepdeck drive by my office. What a way to start your day! I then received a call from our scheduler who said "there's some 6x6 wrecker out in the lot getting loaded is that yours". I went out and talked to the truck driver who said the truck was out of Little...

Quite Heavy! Attached is a fully dressed brand new Cummins NHC 250 in the crate in my old Dodge. Should be a pretty easy swap just make sure you have good chains and a healthy overhead/crane/excavator as other mentioned a harbor freight 1.5 ton crane won't cut the mustard! There is quite a...

from the 4th parade this weekend Not the best picture but we had 4 of our trucks in a parade this weekend and my M818 with 1600's was parked in front of a Dodge 2wd 1500.

mileage The trip from Owatonna, MN to Columbus, OH is 746 miles or 12 hours. If someone local from Ohio wanted to deliver them to Coshocton the distance is only 77 miles. thanks, Andy

Thanks Thanks Daniel. I'll post a request for a rate on the site. If anybody wants has other shipping companies they have used or live in Ohio and want to pick them up and deliver to Coshocton to make a little extra cash let me know. Thanks, Andy

I recently won 12 of the 2 piece Hemmt rims in the last Columbus, OH sale. It looks like the rims are strapped to a single pallet. What would be the best avenue to ship these to Minnesota? Any trucking companies in particular recommended? If somebody in Ohio wants a set of 6 Hemmt rims...

Whew! It's bad enough just putting a seal in a rear 5 ton hub! I just grabbed a set of 12 of these rims from Columbus that I don't really need! If anybody in Ohio area needs a set give me a hollar for a GREAT price! Andy 507-250-5288

Looks Great! A few questions since I haven't tried using our two piece rims yet. Did you just use the bud caps on the front to extend the studs? Did you have to flip the hubs in the rear? If the rims were flipped did the tires rub? Thanks, Andy

Plus the 3126 Cat doesn't start well in the winter, gets poor fuel economy, has a mediocre at best exhaust note at idle and under load, has a HEUI injection system with a non added value high pressure oil system that is expensive to repair and is problematic, sleveless, lucky to get 10k hours...

Go clock wise on the knob on the hand brake to tighten. If the handle is stuck or maxed of threads follow the cable to the drum brake on the driveline and tigthen the cable there-easy as pie Make sure you have a decent amount of friction material on your shoes as you have 20,000lbs relying...

PM You have a PM.

Transmission???? Do you happen to know if these trucks have the 700 series Allison automatics as listed in the descriptions? I googled this series of truck and it pulls up the Caterpillar transmission although the description of the trucks said 754 Allison and the pictures didn't look like the...

The NHC 250's like to run! Good deal!

Yes you can pull start that truck with the black control box missing. The beauty of the NHC is you could have every wire stolen off your truck and you should be able to pull start it. On top of the injection pump there is a knurled round knob which you will bottom out clockwise to turn the...

Tom, Glad to see you found an M818. Hope you can get it up and running soon. Make sure to share pics of the completed unit with your log loader when you are done. Have you turned the injection pump on manual and pull started it to see if all mechanicals are good on the truck? I'd check...

Can someone please help determine what year this XM818 is? Vin# C124-12978 Thanks, Andy

Thanks Wreckerman- Thanks for the call and I appreciate the help. Andy

By chance are any of you going to be at the Redstone, AL location today or tomorrow? I need to get vin's from two trucks I purchased at this location and am having a difficult time getting the GL rep to help out. Please PM me or call me on my cell phone 507-250-5288 if you can be of...