Search results

We (Fire Dept) has one I got from DOD surplus. The one we have does not 24vDC boost. I don't know if is supposed to or not (but that is why I got it).

Thanks for the info on locking handle. That is of interest. But question is: is the spring/washers supposed to be internal parts of the latch assemly (stay inside the latch)? Or what parts do I need to replace?

Rather than start a new thread. ONLY problem with our new M925 (converted to snowplow) is drivers outside door handle. Removed today to see if can repair (photo attached). On the shaft was a washer/shim, spring, washer/shim. Not want illustration in -20 looks like. I'm thinking the...

Easiest thing would be to get an Dolly (4whl) of capacity to handle your ISO or 280 shelter. The 20ft single fold ISO shelter sitting in my yard has dolly fittings. None of the 280 (5ea) do. The dolly fittings for 280 shelters are an accessory kit. I have yet to learn of anyone that has come...

Stop in and ask them if they need help with getting it in service. Vol FD operate on VOLUNTEER time and you have at least as much of that as they do. They may have not realized a 004 is 3ph. They may not have 3ph in the station. You help then out and might find you're at the front of the...

Welcome to the new Army of equality of DiFi. Hordes of girl "soldiers" that MIGHT be able to life 50lb.

M925 snowplow 2009 red River rebuild. Picked up at Ft McCoy w/280mi this spring thru Fed Surplus for my small town. NICE truck everthing rubber/plastic was replaced Local truck shop finally got hitch installed Tuesday mounted plow yesterday. Removed winch and reused the hydrualic system...

Sam rebuilt some M916A0 (like 2008). Anyone know if these were rebuilt with the CAT transmission or replace with an Allison?

Will check actual width with mfg. Manual says 86" but not sure correct. Don't have move to Iowa figured out (who/how). Might not be able until spring.

Any hundreds of M931A1 and A2 coming thru the system. CTIS of the A2 would be ideal for farmer dragging trailer into the field (which is typical). If can keep the CTIS working.

We finally received title. A PITA. Titled as a 1997 RedRiver M925. If you need plates you have to advise the state goons when you send the title for transfer to you FD. Apparently such is not obvious.

I (my vol FD) has received a DOD surplus trailer which is located at AP Hill in VA. Need some help getting it picked up/removed from base. Trailer is a 2 axle flatbed (car hauler style) with a firefighting system installed. Approx 5500lb 20ft. Pintle hitch with a 7pin RV style electrical...

And back in the days of old an M123 couldn't legally haul an M48 on the hiway. And today you can't legally drive a 100ft platform (aerial fire truck) on an interstate. So what?

thanks for the info

Is alternator on M925 a dual voltage 12/24v? City has a 2007 Redstone rebuild. Dose rebuild use same alternator as originally manufactured or upgrade/modify? We need 12V to power an electric over hyd snowplow pump and to operate the motors on a sander.

Replace the screws with square or torx drive. Or if think can get away with it install screws with one way head (anti tamper as you see on restroom stalls).

I guess that makes this one a wackermobile.

Thanks much. We missed out on some DRMS 2008 vintange M916A3 in Colorado. Someone got great chassis.

Thanks could you also get top of frame to ground dimension?

It's not about lazy. Its about filling the force with girl soldiers and now letting flocks of pixies in. Give them something more that a minor job and they might break a nail or drop something on their foot. The few men left have to pickup the slack.