Search results

Here you go.

I cut down the stock battery box and seat to use it as the middle seat. Still had plenty of room for two group 31 batteries within and room for an MRAP seat on the passenger side. Middle seat back still folds like stock.

I think northern tool has a pickup bed unloaded consisting of a fabric that is placed under the load and a winching device that rolls up the fabric at the tailgate end. This results in the load being pulled rearward. You would need to make one long and wide enough for the deuce bed.

I have an M927 long bed with a hi-lo on it as well. My stairs look like yours as well.

I had a soft top and now have a hard top. It is somewhat quieter now. I do like running topless, especially in parades. I have a wrecker so taking off / putting on the hard top by my self is easier than the soft top.

No need to pitch it. Open it up, clean it out as best you can, clean the switch contacts, and lube the switch cams. I have found white powder inside from aluminum corrosion on the switches in my trucks.

Probably the heater core leaking. Very common to rub a hole in the core due to vibration. There are threads on replacement cores and eliminating the rubbing.

Mine has a drop-side bed which according to the TM, was specifically not produced due to the length. The bed is similar to a deuce bed in that it does not have the taller (and fixed) sides towards the front. In fact, the troop seats from my deuce fit the 927. I have yet to see another like it.

My bed has a single layer of 3/16 “ or so-thick metal

Was the motor 24V?

Shock seems to operate correctly.

I think more important than coarse or fine thread is the use of locknuts. I used three inch grade 5 coarse thread bolts with grade C locknuts.

Those guys at EB are the reason I got into these in the first place. The wife and would be trolling past where there were several big trucks and camping trailers out on beach where no one else could get to with RV’s. I tell the wife we just got to have one. She agrees we should get one. I have...

Welcome. There are a few of us. I off-road east of town between Horizon and the Clint cutoff. Before rona, we would gather at Elephant Butte. Many of El Paso’s big MV truck owners store their trucks at the Butte.

The purpose of the c-channel spacer is to clear the parking brake drum.

I figured on mounting one of those with the base below the bed so the removable hoist inserts through a hole in the bed. The base would have been mounted to one of the bed support rails for adequate support. This way, one would not lose bed space when the hoist is not installed and you take...

The switch can be opened up and the contact clean/lubed fairly easily.

I purchased from dbelectrical.com. Low price and alternators have been trouble free.

Mine is a M35A2. I do not know if my tool box dimension are different from an A3.

The 5ers have two pairs of batteries wired in series, and the series pairs are paralleled.