Search results

I have a suspicion the algae growth has something to do with translucent nature of the tanks themselves. The fuel treatment has instructions for "shock treating" the fuel. This will kill the algae "in place" but leaves something akin to coffee grounds when it kills it. Once growing (slimy...

I "think" HPG had a kit. Great guy, give him a call.

I think you will be surprised at how fast algae will grow in diesel fuel in these trucks. Over the course of my career I've purchased close to 3/4 of a million gallons of diesel and never had a bio problem until the HMMWV's came along. I dose every tank with POWER GUARD. Let us know what you...

When you get through with the pump I would suggest that you check the fuel system for BIO contamination. REMOVE and inspect the fuel filter, LOOK at the inside of the fuel tank for contamination that could stop up the sock on the fuel pickup. Just my 2 cents.

Let me add a PS. If you did not remove the fuel filter canister from the fire wall you should pay special attention to the cavity in the bottom of the filter housing where it accumulates water. This needs to be cleaned thoroughly. This housing can be a real PITA to replace, comes off pretty...

BAD NEWS........... you are not through...... if you have the square panel with 4 screws in the bed of the truck you need to remove the panel then the fuel sender (round thing with 5 or 6 screws 2 wires) and have a look inside the tank. If the bottom looks anything like your filter removal and...

I would be surprised if it was not a fuel issue. REMOVE the fuel filter from the truck and post pictures, bet it's ugly. The trans light is probably from low pressure from the engine not turning fast enough to keep up the trans pump pressure as it stalls. Algae grows in diesel fuel and if the...

Your local parts house could have provided the instal kit for this........ just take the joint with you. First time i've ever seen lock washers on a joint before........I'm positive someone else has though.

Let me clarify, I'm pretty sure it was HPG where I saw the kit. Factory stuff.

If I remember correctly one of the big vendors sells a "kit" of these return lines, rated for diesel fuel.

My two cents for what it's worth, Tractor Supply where I live sales a "shim" in the same size as the large brass washers. Cad plated I think, stocked with the 3 point hitch goodies,they work for me.

About what I found, no use on code for it. 1097 rebuilds in TX. 4L80e is one tuff box and the items to upgrade a 2000 and newer to 4L85e are available. THANKS

What vehicle uses PN 12563695, 57K6233, NSN 2520016579861. Inquiring minds would like to know.

For anyone that is a little geospatially inclineed I would be happy to explain how to align their truck. You need a relatively level floor, a torpedo level with a laser, a digital inclinometer (decent ones are available pretty cheap), some square aluminum tubing to make 2 jigs, a couple...

I stand corrected, I know nothing about Fords except how to turn the key.

This anti freeze is probably intended for the commercial type diesels with the wet liner. The anti cavitation is probably DCA that we added to regular antifreeze before the "long life" stuff came along. I know some one will correct me but i've never seen a "bored liner" engine that had to have...

I've owned a bunch of them, I know what they are. I also know what "cavitation pitting" is...... don't ask!

Now you did it! You're going to have to explain "wet liners" to them!

If you plan on putting a top quality electric winch $$$$$ in your truck IMHO the mile marker winches are the way to go. Don"t let the hydraulic thing scare you. Even a cheap winch that requires a generator and battery swap deserves to be priced out, you might be surprised. My two cents. A J

Demilled deep water fording valve???? Look at the new one in the picture above it. Belongs in the hole in the dash at your right knee. My two cents. A J